| Nominal Diameter | DN25-DN400 |
| Khatello ea Lebitso | 1.0Mpa/1.6Mpa/2.5Mpa/4.0Mpa |
| Karolelano ea Range | Max 40:1 (tlasa P=101.325Kpa,T=293.15K) |
| Ho nepahala | 1.5% (E Tloaelehileng), 1.0 (Ha u rata) |
| Pheta-pheta | Ho feta 0.2% |
| Bopaki ba ho phatloha | ExiallCT6Ga |
| Tshireletso | IP65 |
| Shell Material | Aluminium Alloy/Carbon Steel/Stainless Steel |
| Phepelo ea motlakase | 3.6V Lithum Battery e Matla Matla a kantle DC18-30V |
| tlhahiso Letshwao | 4-20mA, Pulse, Alamo |
| Puisano | RS485 Modbus RTU |
| Boholo | L | D | K | N-φh | H | W | Litlhaloso |
| DN25(1") | 200 | 115 | 85 | 4-φ14 | 335 | 200 | Boitsebiso ba 1.Flange ho latela PN16 GB9113.1-2000 2.Li-flange tse ling lia fumaneha |
| DN40(1½") | 200 | 150 | 110 | 4-φ18 | 365 | 230 | |
| DN50(2") | 150 | 165 | 125 | 4-φ18 | 375 | 275 | |
| DN80(3") | 240 | 200 | 160 | 8-φ18 | 409 | 280 | |
| DN100(4") | 300 | 220 | 180 | 8-φ18 | 430 | 285 | |
| DN150(6") | 450 | 285 | 240 | 8-φ22 | 495 | 370 | |
| DN200(8") | 600 | 340 | 295 | 12-φ22 | 559 | 390 | |
| DN250(10") | 750 | 405 | 355 | 12-φ26 | 629 | 480 | |
| DN300(12") | 900 | 460 | 410 | 12-φ26 | 680 | 535 | |
| DN400(16") | 1200 | 580 | 525 | 16-φ30 | 793 | 665 |
| DN (mm/inch) |
Mohlala | Tlhaloso ea phallo | Phallo (m3/h) | Qmin (m3/h) | Max.pressur e tahlehelo (Kpa) | Lintho tse entsoeng ka likhetla | Boima(kg) |
| DN25(1″) | QTWG-25(A) | G50 | 5-50 | ≤1 | 1 | ≤1.6MPa Aluminium Alloy ≥2.0MPa Tšepe ea carbon kapa SS304 |
7 |
| DN40(1½″) | QTWG-40(A) | G60 | 6-60 | ≤1 | 1 | 8 | |
| 50(2") | QTWG-50(A) | G40 | 6.5-65 | ≤1.3 | 0.9 | 8.5 | |
| QTWG-50(B) | G65 | 8-100 | ≤1.6 | 0.8 | |||
| QTWG-50(C) | G100 | 10-160 | ≤2.4 | 2.0 | |||
| 80(3") | QTWG-80(A) | G100 | 8-160 | ≤2.4 | 1.0 | 9.5 | |
| QTWG-80(B) | G160 | 13-250 | ≤3.0 | 1.6 | |||
| QTWG-80(C) | G250 | 20-400 | ≤5.0 | 2.0 | |||
| 100(4") | QTWG-100(A) | G160 | 13-250 | ≤3.3 | 1.0 | 15 | |
| QTWG-100(B) | G250 | 20-400 | ≤4.2 | 1.6 | |||
| QTWG-100(C) | G400 | 32-650 | ≤6.7 | 1.8 | |||
| 150(6") | QTWG-150(A) | G400 | 32-650 | ≤7.8 | 1.6 | 27 | |
| QTWG-150(B) | G650 | 50-1000 | ≤10 | 2.0 | |||
| QTWG-150(C) | G1000 | 80-1600 | ≤12 | 2.3 | |||
| 200(8") | QTWG-200(A) | G650 | 50-1000 | ≤13 | 1.6 | Carbon Steel kapa SS304 | 45 |
| QTWG-200(B) | G1000 | 80-1600 | ≤16 | 2.0 | |||
| QTWG-200(C) | G1600 | 130-2500 | ≤20 | 2.2 | |||
| 250(10") | QTWG-250(A) | G1000 | 80-1600 | ≤20 | 1.2 | 128 | |
| QTWG-250(B) | G1600 | 130-2500 | ≤22 | 2.0 | |||
| QTWG-250(C) | G2500 | 200-4000 | ≤25 | 2.3 | |||
| 300(12") | QTWG-300(A) | G1600 | 130-2500 | ≤22 | 1.6 | 265 | |
| QTWG-300(B) | G2500 | 200-4000 | ≤25 | 2.0 | |||
| QTWG-300(C) | G4000 | 320-6500 | ≤35 | 2.3 | |||
| 400(16") | QTWG-400(A) | G1600 | 300-2500 | ≤25 | 1.8 | 380 | |
| QTWG-400(B) | G2500 | 500-4000 | ≤35 | 2.0 | |||
| QTWG-400(C) | G4000 | 600-8000 | ≤40 | 2.3 |
| QTWG | Mekhahlelo | XXX | X | X | X | X | X | X | X |
| Boholo (mm) | DN25-DN400mm | ||||||||
| Ho nepahala | 1.5% (e tloaelehileng) | 1 | |||||||
| 1.0% | 2 | ||||||||
| Lebitso | 1.0MPa | 1 | |||||||
| Khatello | 1.6MPa | 2 | |||||||
| 2.5MPa | 3 | ||||||||
| 4.0MPa | 4 | ||||||||
| Ba bang | 5 | ||||||||
| 'Mele Thepa | Aluminium Alloy (Bakeng sa boholo bo ka tlase ho DN150mm) | 1 | |||||||
| Tšepe ea Carbon | 2 | ||||||||
| Ts'epe e sa beng le mabali | 3 | ||||||||
| Sephetho/Moqoqo | Pulse+4-20mA | 1 | |||||||
| Pulse+4~20mA+485 | 3 | ||||||||
| Pulse+4~20mA+HART | 4 | ||||||||
| Phepelo ea motlakase | Matla a Betri + Matla a Ka Ntle DC24V (lithapo tse peli) | 1 | |||||||
| Motlakase oa Betri + Matla a Ka Ntle DC24V (lithapo tse tharo) | 2 | ||||||||
| Bopaki ba khale | Ka | 1 | |||||||
| Ntle | 2 | ||||||||
