Products
Position :
Radar Level Meter
Radar Level Meter
Radar Level Meter
Radar Level Meter

901 Radar Level Meter

Explosion-proof Grade: Exia IIC T6 Ga
Measuring Range: 10 meters
Frequency: 26 GHz
Temperature: -60℃~ 150℃
Measurement Precision: ±2mm
Introduction
Application
Technical Data
Installation
Introduction
901 radar level meter is one type of high frequency level meter. This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to
10 meters. The sensor material is PTFE, so it could work well in corrosive tank, such as acid or alkaline liquid.
Radar Level Meter Working Principle: An extremely small 26GHz radar signal emitted in short pulse form from the antenna end of the radar level gauge. The radar pulse is reflected by the sensor environment and the surface of the object and is received by the antenna as a radar echo. The rotation period of the radar pulse from emission to reception is proportional to the distance.That is how the level distance be measured.
 
Advantages
Radar Level Meter Advantages and Disadvantages
1. The integrated anti-corrosion outer cover structure effectively prevents the corrosive medium from contacting the probe, with excellent anti-corrosion performance, suitable for the measurement of corrosive medium;
2. It adopts advanced microprocessor and echo processing technology, which not only enhances the echo ability, but also helps to avoid interference. The radar level gauge can be applied to various complicated working conditions;
3. Using 26GHz high-frequency transmitting frequency, small beam angle, concentrated energy, stronger anti-interference ability, greatly improved measurement accuracy and reliability;
4. Compared with the low-frequency radar level gauge, the measurement blind area is smaller, and good results can be obtained for small tank measurement; 5. It is almost free from corrosion and foam;
6. High signal-to-noise ratio, better performance can be obtained even in fluctuating environment.
Application
Radar Level Meter Application
Applicable medium: various highly corrosive liquids and slurries, such as: process reaction storage tanks, acid and alkali storage tanks, slurry storage tanks, solid storage tanks, small oil tanks, etc.
 
Acid and Alkali Storage Tanks
Acid and Alkali Storage Tanks
Slurry Storage Tanks
Slurry Storage Tanks
Small Oil Tank
Small Oil Tank
Technical Data

Table 1: Technical Data For Radar Level Meter

Explosion-proof Grade Exia IIC T6 Ga
Measuring Range 10 meters
Frequency  26 GHz
Temperature: -60℃~ 150℃
Measurement Precision ±2mm
Process Pressure -0.1~4.0 MPa
The Signal Output 2.4-20mA, HART, RS485
The Scene Display Four digital LCD
Shell Aluminum
Connection Flange (optional)/Thread
Protection Grade IP65

Table 2: Drawing For 901 Radar Level Meter

Table 3: Model Choose Of Radar Level Meter

RD91 X X X X X X X X
               
License Standard (Non-explosion-proof) P
Intrinsically safe (Exia IIC T6 Ga) I
Intrinsically safe type, Flameproof (Exd (ia) IIC T6 Ga) G
Antenna Type / Material / Temperature Sealing horn / PTEE / -40... 120 ℃ F
Process Connection / Material Thread G1½″A    G
Thread 1½″ NPT   N
Flange DN50 / PP   A
Flange DN80 / PP   B
Flange DN100 / PP   C
Special Custom-tailor   Y
The Outlet  Pipe  Length of the Container Outlet pipe 100mm A
Outlet pipe 200mm B
The  Electronic Unit (4~20) mA / 24V DC / Two wire system 2
(4~20) mA / 24V DC / Four wire system 3
(4~20) mA / 24V DC / HART two wire system 4
(4~20) mA / 220V AC / Four wire system 5
RS485 / Modbus 6
 Shell / Protection  Grade Aluminum / IP67 L
Stainless Steel 304 / IP67 G
Cable Line M 20x1.5  M
½″ NPT N
Field Display/The Programmer With A
Without X
Installation
901 Radar Level Meter Installation
Installation guide
901 radar level meter be installed in the diameter of the 1/4 or 1/6 tank .
Note: The minimum distance from the tank wall should be 200mm. 

901 Radar Level Meter Maintenance
1. The power switch of the radar level gauge must not be operated too frequently, otherwise it will easily burn the power card;
2. After the radar level gauge is turned on, do not operate in a hurry, but give the instrument a buffer start time.
3. Pay attention to the cleanliness of the radar antenna. Excessive adhesion will cause the radar level gauge to not work normally.
4. Use alcohol, gasoline and other solvents to clean the surface of the radar antenna.
5. When the temperature inside the instrument is too high, a fan can be used to blow the housing of the radar level gauge to cool down.
Send Your Inquiry
Exported to more than 150 countries around the globe, 10000 sets/month production capacity!
Copyright © Q&T Instrument Co., Ltd. All Rights Reserved.
Support: Coverweb