Wafer Electromagnetic Flow Mita sitere na China Manufacturer

Ndepụta ngwaahịa

Electromagnetic Flow Mita

Vortex Flow Mita

Ultrasonic Flow Mita

Mita na-agba ọsọ Turbine

Thermal Mass Flow Mita

Mita na-efe efe Coriolis

Igwe igwe rotameter

Precession Vortex Flowmeter

Ultrasonic Ọkwa Mita

Mita Ọkwa Rada

Rada-Flowmeter

Oval Gear Flow mita

Water Quality Analyzer

Throttling Device

Magnetic Level Gauge

Kpọtụrụ anyị

Kpado igwe ojii

Igwe mmiri na-erugharị magnetik

Mita na-erugharị mmiri

Ọgwụgwọ mmiri

Mita eruba mmiri

Okwu mmalite

Ngwa

Data teknụzụ

Nwụnye

Okwu mmalite

Wafer electromagnetic eruba mita bụ ụdị olu mita eruba. Ọ na-eji ọgbọ ọhụrụ nke teknụzụ mkpuchi dị elu pụrụ iche na mkpuchi PFA nwere enyo pụrụ iche, nke dabara adaba maka nha nke pulp viscous na gypsum slurry. Eletrọd ya na-apụ apụ na-eme ka mmezi dịkwuo mfe.

Ụkpụrụ nke Wafer electromagnetic flow mita:Ngwaahịa a gbadoro ụkwụ n'iwu Faraday nke induction eletrọnịkị, nke a na-eji tụọ njikwa ihe karịrị 20 μS/cm nke mmiri na-ebugharị. Na mgbakwunye na ịlele mkpokọta mkpokọta nke mmiri na-ebugharị, mana enwere ike iji tụọ acid siri ike, alkali na mmiri mmiri ndị ọzọ siri ike na-emebi emebi na apịtị, pulp, wdg.

Uru

Wafer Electromagnetic Flow Miter Uru na ọghọm ya
Wafer electromagnetic eruba mita nwere ahụ dị mkpụmkpụ, ọ nwere ike tinye ya na warara ebe dị ka nke ọma, olulu, ogbugba mmiri n'ubi ọkpọkọ, wdg.
Ọ dabara na flanges niile dị ka ANSI, DIN, JIS, wdg Ya mere ọ bụrụ na ịmaghị ụkpụrụ flange, ị nwere ike họrọ ụdị a.
Na wafer electromagnetic eruba mita adopts adịghị emerụ na inogide igwe anaghị agba nchara dị ka akụrụngwa (SS304 ma ọ bụ SS316), n'ihi ya, ọ ga-eji maka mmiri ọṅụṅụ, n'okpuruala mmiri, wdg N'ihi nri ọkwa nha, anyị na-atụ aro ndị ahịa na-eji SS316 ihe.
Wafer Electromagnetic eruba mita dịkwa nnọọ ọnụ ala, ọ na-adịkarị ọnụ ala 10% karịa otu dayameta electromagnetic eruba mita na flange njikọ.
Mita na-erugharị electromagnetic wafer dị mfe ịnyefe, chekwaa ego ibu gị. Ọ bụghị naanị na ahụ ya dị mkpụmkpụ ma dịkwa gịrịgịrị, mana ịdị arọ ya dịkwa obere.
O nwere otutu njiri mara maka nhọrọ. Ọ nwere mmepụta ugbu a yana mmepụta pulse maka ijikọ PLC ma ọ bụ ngwaọrụ ndị ọzọ. Ị nwekwara ike ịgụ nha ọsọ site na RS485/HART/Profibus

Ngwa

Ngwa Wafer Electromagnetic Flow Mita
Electromagnetic eruba mita ọtụtụ-eji na mmiri ọgwụgwọ, nri ụlọ ọrụ, pharmaceutical, petrochemical, akwụkwọ igwe nri, kemịkalụ nlekota wdg.
N'ime ụlọ ọrụ mmepụta ihe, a na-ejikarị achịkwa mmiri na-eme ka mmiri dị jụụ maka nkedo ígwè na-aga n'ihu, ntụgharị ígwè na-aga n'ihu, na ọkụ ọkụ eletrik na-emepụta ígwè;
N'ebe a na-enye mmiri na mmiri na-ekpo ọkụ na ụlọ ọrụ ọha na eze, a na-ejikarị mita eletrik eletrik eme ihe maka ịnyefe nha nke mmiri ngwaahịa emechara na mmiri mmiri na mmiri mmiri;
N'ime usoro pulp nke ụlọ ọrụ mpempe akwụkwọ, mita electromagnetic eruba na-etinye aka na nha nke eruba nke pulp na-egweri, mmiri, acid, na alkali;
N'ụlọ ọrụ coal, na-atụ ịsacha coal na pipeline hydraulic na-ebufe coal slurry.
Maka ụlọ ọrụ nri na ihe ọṅụṅụ, a na-eji ya maka nha biya na ihe ọṅụṅụ.
Maka ụlọ ọrụ kemịkalụ na petrochemical, a na-eji ya tụọ mmiri mmiri na-emebi emebi, dị ka acid na alkalis wdg.

Ọgwụgwọ mmiri

Ụlọ ọrụ nri

Ụlọ ọrụ ọgwụ

Petrochemical

Ụlọ ọrụ akwụkwọ

Nyochaa kemịkalụ

Ụlọ ọrụ metallurgical

Mgbapu Ọha

Ụlọ ọrụ coal

Data teknụzụ

Tebụl 1: Nkọwapụta Mita Na-aga Electromagnetic

Nha	DN25mm-DN200mm
Nrụgide aha	1.6Mpa
izi ezi	±0.5% (Ọkọlọtọ) ± 0.3% ma ọ bụ ± 0.2% (Nhọrọ)
Liner	PTFE, FEP, PFA
Electrode	SUS316L, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum-iridium
Ụdị nhazi	Ụdị njikọta, ụdị dịpụrụ adịpụ, ụdị submersible, ụdị ihe akaebe mbụ
Okpomọkụ Ọkara	-20 ~ + 60degC (ụdị njikọ)
Okpomọkụ Ọkara	Ụdị dịpụrụ adịpụ (PTFE/PFA/FEP) -10~+160degC
Okpomọkụ gburugburu	-20 ~ + 60 Celsius
iru mmiri gburugburu	5 ~ 90% RH ( iru mmiri dị ala)
Oke nso	0.5m/s-15m/s
Omume omume	>5 anyị / cm
Klas nchekwa	IP65 (Ọkọlọtọ); IP68 (Nhọrọ maka ụdị dịpụrụ adịpụ)

Ihe ngosi mmepụta	4-20mA, pulse/frequency, relay
Nzikọrịta ozi	MODBUS RTU RS485, HART(Nhọrọ), GPRS/GSM(Nhọrọ)
Ịnye ọkụ	AC220V (nwere ike iji maka AC85-250V) DC24V (nwere ike iji maka DC20-36V) DC12V(Nhọrọ), Batrị kwadoro 3.6V(Nhọrọ)
Oriri ike	<20W
Ihe akaebe mgbawa	ATEX Exdll T6Gb

Tebụl 2: Wafer Electromagnetic Flow Mita Ogologo Ogo

Nha	Oke ọsọ & Tebụl Ọsọ
(mm)	0.1m/s	0.2m / s	0.5m / s	1m/s	4m/s	10m/s	12m/s	15m/s
25	0.177	0.353	0.883	1.766	7.065	17.663	21.2	26.494
32	0.289	0.579	1.447	2.894	11.575	28.938	34.73	43.407
40	0.452	0.904	2.261	4.522	18.086	45.216	54.26	67.824
50	0.707	1.413	3.533	7.065	28.260	70.650	84.78	105.98
65	1.19	2.39	5.97	11.94	47.76	119.40	143.3	179.10
80	1.81	3.62	9.04	18.09	72.35	180.86	217.0	271.30
100	2.83	5.65	14.13	28.26	113.04	282.60	339.1	423.90
125	4.42	8.83	22.08	44.16	176.63	441.56	529.9	662.34
150	6.36	12.72	31.79	63.59	254.34	635.85	763.0	953.78
200	11.3	22.61	56.52	113.04	452.16	1130.40	1356	1696
Na-atụ aro ọsọ ọsọ: 0.5m/s - 15m/s

Tebụl 3: Nha nha Mita Electromagnetic Wafer

Dayameta	φA(mm)	φB (mm)	φC(mm)	H(mm)	L(mm)
DN25	60.5	68	22	295	100
DN32	68.5	76	30	303	100
DN40	74.5	89	36	316	100
DN50	90.8	102	48	329	100
DNA65	109.8	119.5	64	346.5	150
DN80	120.7	133	77	360	150
DN100	150.2	159	102	386	150
DN125	174.8	190	121	417	200
DN150	204.7	219	147	446	200
DN200	257.8	273	207	500	200

Tebụl 4: Nhọrọ Mita Flow Wafer

QTLD		XXX	X	X	X	X	X	X	X	X

Caliber	DN25mm-DN200mm	1
Nrụgide aha	1.6Mpa		1
Ụdị njikọ	Njikọ njikọ			1
Ihe eji eme ihe	PTFE				1
	FEP				2
	PFA				3
Electrode ihe	316L					1
	Hastelloy B					2
	Hastelloy C					3
	Titanium					4
	Platinum-iridium					5
	Tantalum					6
	Igwe anaghị agba nchara kpuchie na tungsten carbide					7
Ụdị nhazi	Ụdị njikọ						1
	Ụdị dịpụrụ adịpụ						2
	Ime ụdị imikpu						3
	Integral ụdị Ex-proof						4
	Ụdị dịpụrụ adịpụ Ex-proof						5
Ike	220VAC							E
	24VDC							G
nkwurịta okwu mmepụta	Na-erute olu 4-20mADC/pulse								A
	Nkwukọrịta ụda olu 4-20mADC/RS232								B
	Nkwukọrịta ụda olu 4-20mADC/RS485								C
	Mwepụta HART olu na-aga n'ihu na nzikọrịta ozi								D
Ihe ntụgharị	Square									A
	okirikiri									B

Nwụnye

Wafer Electromagnetic Flow Mita Nwụnye & Nlekọta
1. Nwụnye
Nke mbụ, anyị kwesịrị ịhọrọ otu ụzọ flanges dabara adaba. Mgbe ahụ jikọọ mita eruba na pipeline.
Ekwesịrị ịwụnye mita ikuku electromagnetic wafer nke ọma iji hụ na nha dị mma. Dị ka ọ na-adịkarị, anyị kwesịrị ịhapụ 10D (ugboro 10 nke dayameta) ogologo ọkpọkọ kwụ ọtọ tupu wafer electromagnetic flow mita na 5D n'azụ wafer electromagnetic flow mita.
Ma gbalịa ka ịzenarị ikiaka /valve/pump ma ọ bụ ngwaọrụ ọzọ nke ga-emetụta ọsọ ọsọ. Ọ bụrụ na ebe dị anya ezughị, biko tinye mita eruba dị ka foto a si dị.

lwụnye n'ebe kacha ala na kwụ ọtọ n'elu Awụnyela n'ebe kachasị elu ma ọ bụ nri ala ala	Mgbe ọdịda karịrị 5m, tinye iyuzucha valvụ dị n'okpuru ala
lwụnye n'ebe kacha ala mgbe ejiri ya na ọkpọkọ igbapu mepere emepe	Achọrọ 10D nke elu na 5D nke mgbada
Ejila ya n'ọnụ ụzọ nke mgbapụta, wụnye ya na ọpụpụ mgbapụta	guzoro n'akụkụ ụzọ na-arị elu

2. Nlekọta
Nlekọta oge niile: ọ dị mkpa ka ịme nyocha ngwa ngwa n'oge oge, lelee gburugburu gburugburu ngwá ọrụ ahụ, wepụ uzuzu na unyi, hụ na ọ dịghị mmiri na ihe ndị ọzọ na-abanye, lelee ma wiring dị mma, ma lelee ma ọ dị ọhụrụ. arụnyere akụrụngwa oghere elektrọnịkị siri ike ma ọ bụ waya arụnyere ọhụrụ n'akụkụ ngwaọrụ Cross-instrument. Ọ bụrụ na usoro nha na-emerụ electrode ma ọ bụ nkwụnye ego na mgbidi tube ihe atụ, a ga-ehicha ya ma na-ehicha ya mgbe niile.