A kwance Nuni Metal Tube Rotameter

Jerin samfuran

Electromagnetic Flow Mita

Mitar Gudun Wuta

Ultrasonic Flow Mita

Mitar Gudun Turbine

Thermal Mass Flow Mita

Mitar Guda Mass na Coriolis

Karfe Tube Rotameter

Precession Vortex Flowmeter

Ultrasonic Level Mita

Radar Level Mita

Radar-Flowmeter

Oval Gear Flow Mita

Water Quality Analyzer

Throttling Device

Magnetic Level Gauge

Tuntube mu

Tag Cloud

Gabatarwa

Aikace-aikace

Bayanan Fasaha

Shigarwa

Gabatarwa

Jerin LZ mai hankali Horizontal Pointer Metal Tube Rotameter yana ɗaukar ingantaccen Honeywell na ƙasa da ƙasa ba tare da tuntuɓar ba kuma ba tare da gano canje-canje a kusurwar filin maganadisu na firikwensin maganadisu ba, kuma tare da babban aikin MCU, wanda zai iya fahimtar nunin LCD: saurin gudana, jimlar kwarara, madauki. current.muhalli zafin jiki, damping lokaci, karamin sigina cirewa.Zabi 4 ~ 20mA watsawa (tare da HART sadarwa), bugun jini fitarwa, high da kuma low iyaka ƙararrawa fitarwa aiki, da dai sauransu, da irin na hankali siginar watsawa yana da high daidaito da aminci, wanda zai iya cikakken. maye gurbin kayan aikin da aka shigo da nau'in iri ɗaya, kuma yana da babban aikin farashi, daidaita ma'aunin kan layi da kariyar gazawar wutar lantarki, da dai sauransu.

Amfani

A kwance LCD Nuni Metal Tube Rotameter Fa'idodin:
1. Shigarwa na kwance, mai sauƙi don shigarwa da kallo;
Tsarin sauƙi, kwanciyar hankali mai kyau da aminci.
2. Independent na matsakaici ta jiki da kuma sinadaran jihohin kamar conductivity, dielectric akai-akai, da dai sauransu.
3. Ana amfani da kowane nau'in matsakaicin yanayi kamar lalata, mai guba da mai fashewa.
4. Ma'aunin mu'amala ko ma'aunin ma'auni na nau'ikan matsakaici guda 2 tare da yawa daban-daban.
5.Biyu-waya 4 ~ 20mADC siginar fitarwa, 0.8 "ko 0.56" LCD dijital nuni.
6.Easy-to-karanta nuni akan duk nau'ikan mita kwarara

Aikace-aikace

A kwance Nuni Karfe Tube Rotameter Application
Horizontal LCD Nuni Karfe Tube Rotameter ya fi dacewa da ƙanana da matsakaicin ma'aunin ruwa ko iskar gas mai ƙanana da matsakaicin bututu, ƙaramar amo da adadin Reynolds na acetic acid, kamar Air, Ruwa, mai mai mai, Steam, Hydrogen, O2, da sauransu, da sauran Liquid ko gas da yawa a cikin Chemical, Pharmaceutical, Petrochemical, Food, Metallurgical Industry, da dai sauransu.

Maganin Ruwa

Masana'antar Abinci

Masana'antar Pharmaceutical

Petrochemical

Masana'antar Takarda

Kula da sinadarai

Masana'antar Karfe

Ruwan Ruwa na Jama'a

Masana'antar Kwal

Bayanan Fasaha

Tebur 1: Tsarin Bayanin Ƙarfe na Tube Rotameter Nuni a kwance

Ma'auni kewayon	Ruwa (20℃) 16~150000 l/h. Iska (0.1013MPa 20℃) 0.5~4000 m3/h.
Rage rabo	10:1 (Nau'i na musamman 20:1).
Daidaiton aji	2.5 (Nau'in Musamman 1.5% ko 1.0%).
Matsin aiki	DN15 ~ DN50 PN16 (Nau'in Musamman 2.5MPa). DN80~DN150 PN10 (Nau'in Musamman 1.6MPa). Matsayin matsin lamba na jaket 1.6MPa.
Matsakaicin zafin jiki	Nau'in al'ada -80 ℃ ~ + 220 ℃. Nau'in zafin jiki mai girma 300 ℃. An yi layi da nau'in FEP ≤85 ℃.
Yanayin yanayi	-40 ℃ ~ + 120 ℃ (Nuni mai nisa ba tare da LCD≤85 ℃ ba). (Nuna nesa tare da LCD≤70℃).
Dielectric danko	1/4" NPT, 3/8" NPT 1/2" NPT≤5mPa.s 3/4" NPT,1" NPT ≤250mPa.s
Fitowa	Daidaitaccen sigina: tsarin waya biyu 4 ~ 20mA (tare da sadarwar HART). Daidaitaccen sigina: tsarin waya uku 0 ~ 10mA. Siginar ƙararrawa: 1. Fitowar watsawa ta hanya biyu. 2.Hanyoyi ɗaya ko biyu-hanyar sauyawa. Fitowar siginar bugun jini: 0-1KHz keɓaɓɓen fitarwa.
Haɗin tsari	Nau'in misali: 24VDC± 20%. Nau'in AC: 220VAC (85 ~ 265VAC) (na zaɓi).
Yanayin haɗi	Flange Zare Tri-clamp
Matakan kariya	IP65/IP67.
Ex-alama	Amintaccen ciki: ExiaIICT3 ~ 6. Nau'in Exd: ExdIICT4 ~ 6.

Tebura 2: A kwance Nuni Karfe Tubu Rotameter Rage Gudun Guda

Caliber (mm)	Lambar aiki	Kewayon yawo			Rashin matsi kpa
		Ruwa L/h		Jirgin m3 / h	Ruwa Kpa		Iska
		Nau'in al'ada	Nau'in rigakafin lalata	Nau'in al'ada Nau'in rigakafin lalata	Nau'in al'ada	Nau'in rigakafin lalata	Iska
15	1 A	2.5~25	--	0.07~0.7	6.5	-	7.1
	1B	4.0~40	2.5~25	0.11~1.1	6.5	5.5	7.2
	1C	6.3~63	4.0~40	0.18~1.8	6.6	5.5	7.3
	1D	10~100	6.3~63	0.28~2.8	6.6	5.6	7.5
	1E	16~160	10~100	0.48~4.8	6.8	5.6	8.0
	1F	25~250	16~160	0.7~7.0	7.0	5.8	10.8
	1G	40~400	25~250	1.0~10	8.6	6.1	10.0
	1H	63~630	40~400	1.6~16	11.1	7.3	14.0
25	2A	100~1000	63~630	3~30	7.0	5.9	7.7
	2B	160~1600	100~1000	4.5~45	8.0	6.0	8.8
	2C	250~2500	160~1600	7~70	10.8	6.8	12.0
	2D	400~4000	250~2500	11~110	15.8	9.2	19.0
40	4A	500~5000	300~3000	12~120	10.8	8.6	9.8
40	4B	600~6000	350~3500	16~160	12.6	10.4	16.5
50	5A	630~6300	400~4000	18~180	8.1	6.8	8.6
	5B	1000~10000	630~6300	25~250	11.0	9.4	10.4
	5C	1600~16000	1000~10000	40~400	17.0	14.5	15.5
80	8A	2500~25000	1600~16000	60~600	8.1	6.9	12.9
80	8B	4000~40000	2500~25000	80~800	9.5	8.0	18.5
100	10 A	6300~63000	4000~40000	100~1000	15.0	8.5	19.2
150	15 A	20000~100000	--	600~3000	19.2	--	20.3

Tebur 3: A kwance Nuni Ƙarfe na Tubin Rotameter Zaɓin Samfurin

QTLZ	X	X	X	X	X	X	X	X	X
Mai nuna alama	Lambar
Alamar gida	Z
LCD nuna alama tare da fitarwa	D
Diamita na al'ada		Lambar
DN15		-15
DN20		-20
DN25		-25
DN40		-40
DN50		-50
DN80		-80
DN100		-100
DN150		-150
Tsarin			Lambar
Kasa-sama			/
Hagu-dama (a kwance)			H1
Dama-hagu (a kwance)			H2
Gefe-gefe			AA
Kasa - gefe			LA
Haɗin zaren			S
Tri-clamp			M
Kayan jiki				Lambar
304SS				R4
316 LSS				R6L
Hastelloy C				Hc4
Titanium				Ti
Layin F46(PTFE)				F
Monel				M
Nau'in nuni					Lambar
Alamar Iinear (alamar nuni)					M7
Alamar da ba ta kan layi (Nuni LCD)					M9
Ayyukan haɗin gwiwa (kawai don nunin LCD)						Lambar
24VDC tare da 4 ~ 20mA fitarwa						S
24VDC tare da sadarwar HART						Z
Ƙarfin baturi						D
Ƙarin aiki							Lambar
Bututu mai aunawa tare da tanadin thermal // jaket mai rufe zafi							T
Auna matsakaicin zafin jiki sama da 120^.C							HT
Ex-hujja:								Lambar
Tare da								W
Ba tare da								N
Ƙararrawa									Lambar
Ƙararrawa ɗaya									K1
Ƙararrawa biyu									K2
Babu									N

Shigarwa

Ƙarfe Tube Rotameter Shigar
Shigar da kwararan mita ya kamata ya ba da garantin shigarwar ≥5DN sashen bututu madaidaiciya, fitar da sashin bututu madaidaiciya ba kasa da 250mm; idan matsakaicin da ke ɗauke da kayan ferromagnetic, yakamata a shigar da matattarar maganadisu a gaban ma'aunin motsi.

1. Don shigar da mita mai gudana, tabbatar da daidaiton bututun auna ya fi 5 kuma yakamata a sanye shi da kewayawa, mai sauƙin kulawa da tsaftacewa kuma baya shafar samarwa.
2. Kulawa da tsarin kulawa a cikin bawul mai sarrafawa, ya kamata a shigar da shi a ƙasa na ma'aunin wutar lantarki.Domin ma'aunin gas, ya kamata a tabbatar da matsa lamba na aiki ba kasa da 5 sau na matsa lamba na ma'auni ba, don yin aikin barga na ma'auni.
3. Kafin shigar da flowmeter, The bututu ya kamata waldi slag tsarkakewa; Lokacin da kafuwa don cire kulle bangaren a cikin kwarara mita; lokacin da amfani bayan shigarwa, sannu a hankali bude bawul iko, Kauce wa girgiza lalacewa kwarara mita