RS485 modbus vortex flow meter 4-20ma

Intelligent vortex flow meter will enjoy good Linearity, Repeatability and accuracy level under professional calibrastion, each of QT vortex meter will carry out calibration before leave factory.
Measured medium: liquid,gas,steam;
Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Palm oil vortex flow meter adopt liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy higher accuracy in actual flow measurement. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Insertion vortex flowmeter enjoy accuracy ¡À1.5%,air flow meter vortex flowmeter is workable with liquid or gas measurement,the calibration medium is different base on actual medium. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Smart vortex flow meter specially for flow measurement of gases and liquids in industry pipeline,vortex flow meter requires higher accuacy before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Gas vortex flow meter specially for gases and liquids flow measurement in industry pipeline,gas vortex flowmeter enjoy higher accuracy compare with orifice plate. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Steam flow meter low price popular in all over the world for steam measure,it also called as steam flowmeter,it transfers data via 4-20mA,HART,RS485 realize wireless communication. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Insertion vortex flow meter with accuracy ¡À1.5%,vortex flow meter is workable with liquid or gas measurement,the calibration medium is different base on actual medium.
Flow Range: Liquid:0.4-7.0m/s
Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Q&T vortex liquid mass flow meter use for liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy good accuracy in actual measurement.
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40℃~65℃ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ≤85%
Power Supply: DC 12-30V or 3.6V battery powered

Flange vortex flow meter is applicable for liquid or gas measurement,the calibration is different for gas vortex flow meter and liquid vortex flow meter. Size: DN15-DN6000;
Measured medium: liquid,gas,steam;
Medium Temp: -40℃~250℃,-40℃~350℃,
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp;
±1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Air flowmeter vortex flowmeter enjoy good Linearity,repeatability and accuracy level under professional calibration,each of vapor vortex flow meter will carry out calibration before leave factory. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Q&T vortex liquid mass flow meter calibration adopt the pulse signal to calibrate the gas flow meter, 5 testing points and each point run three times to guarantee the accuracy. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Relative Humidity: ¨Q85%

Air flowmeter vortex flowmeter has flange,wafer,triclamp,insertion connection etc,vapor vortex flow meter output signals 4-20mA, pulses, HART or MODBUS? RTU are available. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Pressure: 86kPa -106kPa

vortex steam flow meter is kind of velocity measurement method as one of the main methods of flow measurement.flowmeter that uses this principle to measure flow is called a velocity flowmeter. Size:DN15-DN6000;
Accuracy: ¡À1.0 %(Flange/wafer/thread/tri-clamp; ¡À1.5%(Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Vapor vortex flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe.Vortex flow meter’s number of swirls are proportional to the volumetric flow in the pipe. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Steam flowmeter adopt gas venturi nozzle system do the calibration,accuracy with ¡À1.0%, every vortex meter will be well calibrated before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Mass flow meter steam flow meter is applicable for liquid or gas measurement,the liquid vortex meter and steam vortex meter with different k factor guarantee the accuracy. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Palm oil vortex flowmeter adopts Japan technology,with military regulation SS304 or SS316 sensor, guarantee the accuracy and stability of the vortex flow meter. Size: DN15-DN6000;
Accuracy: ¡À1.0 % (Flange/wafer/thread/tri-clamp; ¡À1.5%(Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Q&T vortex liquid mass flow meter calibration adopt the pulse signal to calibrate the vortex flow meter, 5 testing points and each points run three times to guarantee the accuracy. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Relative Humidity: ¨Q85%

Steam flow meter adopt gas venturi nozzle system carry out the calibration,accuracy with ±1.0%,every flow meter will be well calibrated before leave factory.
Size: DN15-DN6000;
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp; ±1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ≤85%
Pressure: 86kPa -106kPa

Palm oil vortex flow meter use for liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy ¡À1% accuracy in actual measurement. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Vortex liquid flowmeter has the sanitary connection, the triclamp could remove during calibration,sanitary vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Each Inline vortex flow meter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam;
Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp,¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Flowmeter vortex specially for flow measurement of gases and liquids in industry pipeline,vortex liquid mass flow meter requires strict calibration with higher accuracy before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Q&T vortex steam flow meters are designed to measure mass flow for saturated and superheated steam without the need for an external flow computer.Inline and insertion style meters are available.
ize: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%

Vortex steam flowmeter measure fluid velocity adopting a principle of operation referred to as the Karman Vortex effect,generate swirl with flow,also called swirl flowmeter. Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output:4-20mA,Pulse Communication:RS485 MODBUS or HART

Steam flow meter with low price specially for superheated steam in pipeline,mass flowmeter steam flow meter for custody transfer purpose compare with other gas flow meter. Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vortex steam flow meter has the sanitary connection, the triclamp could remove during calibration,triclamp vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Mass flow meter steam flow meter has flange,wafer,triclamp,insertion connection etc,vapor mass flowmeter steam flow meter output signals 4-20mA, pulses, HART or MODBUS? RTU are available. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Pressure: 86kPa -106kPa

Vortex shedding flow meter are also in widespread use for measuring mass flow.modern vortex meters are built for more than merely measuring volume flow, and come complete with temperature sensor and flow computer.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Power Supply: DC 12-30V or 3.6V battery powered