Pulse output inline vapor vortex flowmeter

Steam flow meter adopt gas venturi nozzle system carry out the calibration,accuracy with ±1.0%,every flow meter will be well calibrated before leave factory.
Size: DN15-DN6000;
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp; ±1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ≤85%
Pressure: 86kPa -106kPa

Steam flowmeter use to measure gas, steam or liquid flow,could display mass flow rate, vortex air flow meter also could work as mass flow meter in various kinds of mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Q&T vortex liquid mass flowmeter popular in all over the world in steam & liquid measure,it also called as RS485 modbus vortex flowmeter,it transfer data via 4-20mA,HART,RS485 etc. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Palm oil vortex flow meter adopt liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy higher accuracy in actual flow measurement. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Vortex flow meter also could use for flue gases, carbon dioxide, fully demineralized water, solvents, heat-transfer oils, boiler feedwater, condensate water, etc.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Power Supply: DC 12-30V or 3.6V battery powered

Vortex flow meter is a method of measuring the flow rate by detecting the flow velocity of the medium in the pipe during the day, usually work as steam flow meter.
Size: DN15-DN6000;
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp;
±1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ≦0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ≦85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

vortex liquid mass flowmeter adopt gas venturi nozzle system carry out the calibration,accuracy with ¡À1.0%,every steam vortex flow meter will be well calibrated before leave factory. Size: DN15-DN6000;
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Steam flow meter low price has sufficient stock,with DIN,ANSI,JIS flanges in stock for fast delivery,steam flowmeter low price is popular in power plant or boiler plant. Measured medium:liquid,gas,steam;Medium Temp:-40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy:¡À1.0 %(Flange/wafer/thread/tri-clamp; ¡À1.5 %(Insertion type) Flow Range:Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Flange vortex flow meter is applicable for liquid or gas measurement,the calibration is different for gas vortex flow meter and liquid vortex flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Intelligent vortex flow meter will enjoy good Linearity, Repeatability and accuracy level under professional calibrastion, each of QT vortex meter will carry out calibration before leave factory.
Measured medium: liquid,gas,steam;
Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Gas vortex flowmeter has sufficient stock,with DIN,ANSI,JIS flanges in stock for fast delivery,RS485 modbus vortex flowmeter 4-20mA is popular in power plant or boiler plant. Measured medium:liquid,gas,steam;Medium Temp:-40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy:¡À1.0 %(Flange/wafer/thread/tri-clamp; ¡À1.5 %(Insertion type) Flow Range:Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Triclamp vortex flow meter adopt the sanitary connection, the triclamp could remove during calibration, sanitary vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40℃~250℃,-40℃~350℃,
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp;
±1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ≤85%
Pressure: 86kPa -106kPa

Insertion vortex flow meter with accuracy ¡À1.5%,vortex flow meter is workable with liquid or gas measurement,the calibration medium is different base on actual medium.
Flow Range: Liquid:0.4-7.0m/s
Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Q&T vortex liquid mass flowmeter will enjoy good Linearity,repeatability and accuracy level under professional calibration,each of QT vortex meter will carry out calibration before leave factory. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Steam flow meter adopt gas venturi nozzle system carry out the calibration,accuracy with ±1.0%, Insertion vortex flow meter with accuracy ±1.5%, every flow meter will be well calibrated before leave factory.
Size: DN15-DN6000;
Measured medium: liquid,gas,steam; Medium Temp: -40℃~250℃,-40℃~350℃,
Nominal Pressure: 1.6MPa
Accuracy:±1.0 % (Flange / wafer / thread / tri-clamp; ±1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed:≤0.2g

Intelligent vortex meter calibration adopt the pulse signal to calibrate the vortex flow meter, 5 testing points and each points run three times to guarantee the accuracy.
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Relative Humidity: ¨Q85%

Vortex air flow meter offer many advantages including easy installation without impulse lines,no moving parts to maintain or repair, less leak potential and a wide flow turndown range.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Communication: RS485 MODBUS or HART

vortex shedding flow meter adopt Japan technology,the accuracy and stability are well improved,steam flowmeter enjoy ¡À0.75% of reading in liquids, ¡À1.0% in steam or gas. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Relative Humidity: ¨Q85%

Compact vortex flowmeter adopt military regulations proved SS304 or SS316 sensor, guarantee the accuracy and stability of versatile vortex flow meter in measuring liquid, gas or steam fluid. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Steam flow meter low price popular in all over the world for steam measure,it also called as steam flowmeter,it transfers data via 4-20mA,HART,RS485 realize wireless communication. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Vortex steam flow meter has the sanitary connection, the triclamp could remove during calibration,triclamp vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Q&T vortex liquid mass flowmeter will enjoy good Linearity, Repeatability and accuracy level under professional calibration,each of QT vortex meter will under strict calibration before delivery. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Flowmeter vortex use gas venturi nozzle calibration system do the calibration, easy installation and no moving parts to maintain or repair, vortex liquid mass flow meter has leak detect function. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Steam flowmeter is applicable for liquid or gas measurement,the calibration is different for vortex air flow meter and liquid vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vortex steam flowmeter measure fluid velocity adopting a principle of operation referred to as the Karman Vortex effect,generate swirl with flow,also called swirl flowmeter. Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output:4-20mA,Pulse Communication:RS485 MODBUS or HART

Steam flowmeter adopt gas venturi nozzle system do the calibration,accuracy with ¡À1.0%, every vortex meter will be well calibrated before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Vortex Flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe.The number of swirls are proportional to the volumetric flow in the pipe.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered
Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Vortex shedding flowmeter is sensitive to variations in the process conditions are low and with no moving parts have relatively low wear compared to other types of flow meters.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Palm oil vortex flow meter use for liquid measurement,under strict calibration with liquid test bench for water vortex flow meter,enjoy ¡À1% accuracy in actual measurement. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Insertion vortex flowmeter enjoy accuracy ¡À1.5%,air flow meter vortex flowmeter is workable with liquid or gas measurement,the calibration medium is different base on actual medium. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART