PTFE PVDF anti corrosive Ultrasonic level transmitter liquid level sensor

QTLM series non contact ultrasonic level meter use the time of flight measuring principle, the sensor emits ultrasonic pulses in the direction of the medium, the pulses bounce from the surface of the medium and then reflects the ultrasonic pulses back. Ultrasonic fuel tank level sensor adopt Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

The Vertical magnetic Level Indicator is easy to read the water level; Because of the construction of the flaps, one side white and on the other red / orange it is possible to see the level over a greater distance or in darker places.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

QTLM ultrasonic level transmitter is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. The cover, made of waterproof engineering plastics, is small and firm with ABS probe or PTFE probe selectable . Therefore, it is applicable for various fields concerning level measuring and monitoring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Anti-corrosive Ultrasonic Level Gauge PTFE PVDF Sensor level meter is for continuous non-contact level measurement in liquids and solids. It consists of probe and host, both of which are plastic leak-proof structure. Solar power systems can be the perfect solution for level measurement equipment in remote locations.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM ultrasonic level sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception.The sensor fully enclosed probe,improve the intensity of the transmitted signal,integrated casting,good long-term stability.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

This PTFE Liquid Level Sensor Sanitary Water Liquid Ultrasonic level meter has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM 4-20mA ultrasonic level sensor is a kind of continuous measurement of fluids that do not contain foam, vapors, fumes or gases. Support analog and HART communication, which is widely used in water, fuel tank, food tank, solid level application. Ultrasonic level meters are with the ability to provide critical data of processes through PLC control device.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

This sanitary food industry Ultrasonic Level Gauge has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T Instrument offer 590pcs ultrasonic level meters for 5 meter water level measurement. These Ultrasonic level meters are with 4-20mA and HART, easily to connect into user’s systems.
Q&T Instrument as a professional factory,with various ranges level meters in stock which could ensure fast delivery.

Q&T Water Tank ultrasonic Level Gauge is a good choice for application such as Dam water level monitoring,River monitoring, Pool water level monitoring, Environmental water level monitoring; It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T Non Contact Ultrasonic Level Gauge has optional Output: 4-20 mA, relay and Hart etc; This ultrasonic liquid level transmitter can easily connect up to most systems. Ultrasonic level Sensor Material optional ABS, PVC, PTFE; Anti-corrosive with PTFE Probe.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Ultrasonic level transmitters are with the feature of non-contact and maintenance-free, a cost-effective and reliable solution for liquid, solid level measurments. QTLM ultrasonic level meters are with humanized LCD show window which is easy to debug, observe and installed conveniently.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

PTFE Liquid level Sensor Liquid Tank Ultrasonic Level Gauge is for continuous non-contact level measurement in liquids and solids. It consists of probe and host, both of which are plastic leak-proof structure. Solar power systems can be the perfect solution for level measurement equipment in remote locations.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM Series Ultrasonic level transmitter time of flight measuring principle, the sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception. Water tank fuel oil level sensor is compact version, loop-powered 4-20mA for continuous measurement of liquid and solid tanks. it is safe and clean, with high precision and long service life, stable and reliable.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultrasonic level transmitter all input and output lines must be with such protection functions as lightning protection and short circuit
prevention.
QTLM Liquid tank level sensor wave spread speed among gas is influenced by gas temperature, When level meter works, it measures gas temperature needing, compensates for the velocity of sound, so as to ensure the precision of measuring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T Ultrasonic level transmitters are widely used for water, waste water level measurement. As one of the leading manufacturer, Q&T focus in the ultrasonic level transmitter’s production, test, packing etc. To ensure safety in shipment, QTLM series ultrasonic level transmitters are packed in safety export cartons with well protection.

Q&T PTFE Liquid Level Sensor PVDF Sensor ultrasonic level transmitter is a digital level meter with high- performance microprocessor to process signals; It meets the requirements of material level without the contact. It can be widely used for level measurement of municipal river, urban groundwater level, sewage treatment station, water works, etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T offers Magnetic Level Gauges in top-bottom, top and side mounted construction with two types of indicator systems. Magnetic Level Gauge is consists of three major components: Float Chamber, Float and Indicator System; It also can add the reedchain for an analog output signal, that’s 4-20mA Magnetic Level Indicator.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

Ultrasonic fuel tank level sensor is a cost-effective and reliable solution for liquid and solid level tanks. QTLM model Ultrasonic level meter is consisted of sensor and transmitter. The transmitter adopt user-friendly design, support analog and HART communication,
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T PTFE Liquid Level Sensor Non Contact Ultrasonic Level meter has optional Output: 4-20 mA, relay and Hart etc; This ultrasonic liquid level transmitter can easily connect up to most systems. Ultrasonic level Sensor Material optional ABS, PVC, PTFE; Anti-corrosive with PTFE Probe.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

The product has extremely high measurement accuracy, suitable for high-precision measurement level measurement
The product has rich echo processing algorithms and empirical data of various working conditions; it has unique advantages than other similar products in the application of extremely harsh working conditions such as strong dust, steam, or special process storage tanks with stirring and heating rods.

QTLM Ultrasonic level meter is a good choice for level applications that require low cost, non-contact liquid slurry and solid level measurement. It is consisted of sensor and transmitter with the ability to control and monitor. Non contact ultrasonic level meter is easily connect into user’s control system.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

PTFE Liquid Level Sensor RS485 Sanitary Ultrasonic Water Tank Level Meter is a good choice for application such as Dam water level monitoring,River monitoring, Pool water level monitoring, Environmental water level monitoring; It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application. QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

This top quality water level measuring PTFE Liquid Level Sensor is instrument of measured water or material level; This Ultrasonic Level Meter Sensor is a digital level meter with high- performance microprocessor to process signals; It is non-contact, high reliability, cost-effective, easy to install and maintain.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

This Non-contact High Accuracy PTFE Level sensor Sanitary Ultrasonic level Meter is a kind of non-contact, high reliability, and easy installation level measuring instrument. The Wireless Ultrasonic Liquid Tank Level Meter Sensor can be widely
applied to the water supply, food industry, chemical, electricity and oil industries.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application.One machine can handle various conditions.QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultraonic level sensor ideal for high-accuracy, continuous level measurement of a wide variety of liquids in storage and shipping containers requiring a non-contact measurement solution.QTLM ultraonic level meter measuring range up to 30 m.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T Ultrasonic fuel tank level sensor is a stable measurement device, not influenced by the measuring medium properties. High accuracy, ease of use is the main advantage of QTLM ultrasonic level meter. With big LCD window easy to debug and observe.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%