PTFE Liquid Level Sensor High accuracy Ultrasonic Level Meter

QTLM Ultrasonic level meter is a good choice for level applications that require low cost, non-contact liquid slurry and solid level measurement. It is consisted of sensor and transmitter with the ability to control and monitor. Non contact ultrasonic level meter is easily connect into user’s control system.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic level tank meter is a very popular model in sewage treatment, paper pulp, urban water supply etc. QTLM Ultrasonic level meter could be easily configured by button and provide accurate real-time measurement. Adopt advanced terminal, to ensure that wiring will not loose.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM non contact ultrasonic level meters are all well tested in Q&T factory. Q&T professional engineers will test every piece of level meters and provide calibration reports in shipping box. To save freight cost, Q&T team design small size and safety export standard carton boxes for users.

QTLM series intelligent external ultrasonic liquid level meter is a kind of non-contact instrument to measure the liquid level of storage tank. The instrument can measure the dynamic liquid level in real time from outside the tank without damaging the tank and fire-free.When installed, the instrument can be installed and maintained in real time without using flanges, without opening
the tank and without touching the liquid, it is a complete non-contact liquid level meter in practical sense. And a large number
of oil refining, chemical, pharmaceutical, dangerous goods storage and transportation industries are widely used.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

The Vertical magnetic Level Indicator is easy to read the water level; Because of the construction of the flaps, one side white and on the other red / orange it is possible to see the level over a greater distance or in darker places.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

QTLM series non contact ultrasonic level meter use the time of flight measuring principle, the sensor emits ultrasonic pulses in the direction of the medium, the pulses bounce from the surface of the medium and then reflects the ultrasonic pulses back. Ultrasonic fuel tank level sensor adopt Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

This sanitary food industry Ultrasonic Level Gauge has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Emission frequency: 76GHz~81GHz
Measurement range:0.1 m ~30m
Measurement accuracy: ¡À1mm
Beam angle: 6¡ã
Power supply range: 9~24 VDC
Communication mode: TTL/NB/485
Operating temperature: -40~85¡æ
Housing material: Aluminum alloy
Antenna type: Lens antenna

Q&T Ultrasonic level transmitters are widely used for water, waste water level measurement. As one of the leading manufacturer, Q&T focus in the ultrasonic level transmitter’s production, test, packing etc. To ensure safety in shipment, QTLM series ultrasonic level transmitters are packed in safety export cartons with well protection.

This top quality water level measuring PTFE Liquid Level Sensor is instrument of measured water or material level; This Ultrasonic Level Meter Sensor is a digital level meter with high- performance microprocessor to process signals; It is non-contact, high reliability, cost-effective, easy to install and maintain.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

This top quanity water level Ultrasonic level gauge is instrument of measured water or material level; This Ultrasonic Level Meter Sensor is a digital level meter with high- performance microprocessor to process signals; It is non-contact, high reliability, cost-effective, easy to install and maintain.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Non contact ultrasonic level meter is a recommend choice for different level applications which require low cost, non-contact level measurement. QTLM Ultrasonic level meters are with the ability of being easily connected into control systems.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T non-contact oil level Ultrasonic Level Gauge is microprocessor controlled digital level instrument, a good choice of Oil Diesel Fuel Liquid Level Meter. Ultrasonic pulses generated by the sensor (transducer) sent in the measurement, the surface acoustic wave after reflection by the liquid or receiving the same ultrasonic receiver transducer.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM ultrasonic level transmitter all input and output lines must be with such protection functions as lightning protection and short circuit
prevention.
QTLM Liquid tank level sensor wave spread speed among gas is influenced by gas temperature, When level meter works, it measures gas temperature needing, compensates for the velocity of sound, so as to ensure the precision of measuring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T Instrument offer 590pcs ultrasonic level meters for 5 meter water level measurement. These Ultrasonic level meters are with 4-20mA and HART, easily to connect into user’s systems.
Q&T Instrument as a professional factory,with various ranges level meters in stock which could ensure fast delivery.

Frequency: 76GHz ~ 81GHz, 5GHz FMCW bandwidth
Measuring range: 0.3 m ~ 60m
0.08m~30m
0.6m ~ 120m
Measurement accuracy: ¡À1mm
Beam angle: 3¡ã/8¡ã
Power: 15~28VDC
Communication: MODBUS
HART/Series
Signal output: 4 ~ 20mA or RS-485

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application.One machine can handle various conditions.QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

As the China’s leading provider of ultrasonic level measurement technology, QTLM offers a wide selection of devices, from user-friendly and highly reliable transmitters to a broad portfolio of controllers and a broad range of transducers.QTLM ultrasonic level meter is a good choice for level applications that require low cost, non-contact liquid slurry and solid level measurement.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM Series Ultrasonic level transmitter time of flight measuring principle, the sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception. Water tank fuel oil level sensor is compact version, loop-powered 4-20mA for continuous measurement of liquid and solid tanks.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

PTFE Liquid level Sensor Liquid Tank Ultrasonic Level Gauge is for continuous non-contact level measurement in liquids and solids. It consists of probe and host, both of which are plastic leak-proof structure. Solar power systems can be the perfect solution for level measurement equipment in remote locations.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Ultrasonic level transmitters are with the feature of non-contact and maintenance-free, a cost-effective and reliable solution for liquid, solid level measurments. QTLM ultrasonic level meters are with humanized LCD show window which is easy to debug, observe and installed conveniently.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM Series Ultrasonic level meters are widely used in liquid or solid application. Ultrasonic level transmitter support 4-20mA two wire output and HART communication, which is very popular and convenience for user’s system, with the ability to control and monitor.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T High Accuracy Ultrasonic Level Gauge is a kind of non-contact, high reliability, and easy installation level measuring instrument. The Wireless Ultrasonic Liquid Tank Level Meter Sensor can be widely
applied to the water supply, food industry, chemical, electricity and oil industries.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Q&T sanitary ultrasonic level Gauge is a digital level meter with high- performance microprocessor to process signals; It meets the requirements of material level without the contact. It can be widely used for level measurement of municipal river, urban groundwater level, sewage treatment station, water works, etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Non contact ultrasonic level meter with the features of non-contact, high reliability, cost-effective, easy to be installed and maintained. QTLM ultrasonic level gauge widely used for liquid, slurry and solid level tanks, support various connections like thread or flange connection type.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic level tank meter is made up of ABS or PTFE probe which is with acid and alkali resistance. QTLM ultrasonic level meter could be safety installed in complex environments. Support various different connection ways like thread or flange connection.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM series Ultrasonic level transmitter adopt the time of flight measuring principle, widely used for liquid, slurry and solid level tank. 4-20mA ultrasonic level sensor adopt advanced clamp type terminal, to ensure that wiring never loose.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

The product has extremely high measurement accuracy, suitable for high-precision measurement level measurement
The product has rich echo processing algorithms and empirical data of various working conditions; it has unique advantages than other similar products in the application of extremely harsh working conditions such as strong dust, steam, or special process storage tanks with stirring and heating rods.

PTFE Liquid Level Sensor RS485 Sanitary Ultrasonic Water Tank Level Meter is a good choice for application such as Dam water level monitoring,River monitoring, Pool water level monitoring, Environmental water level monitoring; It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM ultrasonic level transmitter is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. The cover, made of waterproof engineering plastics, is small and firm with ABS probe or PTFE probe selectable . Therefore, it is applicable for various fields concerning level measuring and monitoring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%