Portable Handheld Ultrasonic Flowmeter Liquid transmitter Ultrasonic Flow Meter

The structure of Waste Water Flowmeter Handheld Ultrasonic Flow Meter is mainly divided into ultrasonic signal generator, signal receiver and information processing circuit, flow display. First, the ultrasonic signal generator is used to send the signal, the sensor receives the signal, and the time difference is obtained. The ultrasonic information is processed according to the information processing circuit, and the flow is transmitted to the display screen in the form of an electrical signal, and the result is displayed Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm Medium: clean liquids,pure water Built-in rechargeable battery 3.6V Communication: RS232

Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with small transducer to measure flow rate through the pipe wall, the transit time ultrasonic flow principle. It is a 3.6V battery powered ultrsonic flow meter, for using on a wide range of sizes and can provide 24 hours measurement continuely. Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm Measuring clean liquids Built-in rechargeable battery 3.6V 2000 lines storage Communication: RS232

Ultrasonic flow meter use sound waves to determine the velocity of a fluid flowing in a pipe.Inline type ultrasonic flow meter can be OEM,such as Body color,Transmitter color,Channle number,Logo display etc.
Accuracy:±1.0% ; Heat measurement
Carbon steel body; Dual power supply:24VDC &220VAC
Flow velicity:0~±10m/s; 2 way input
4-20mA,Pulse,OCT,RS485; Bi-directional flow measurement
Backlit LCD

Ultrasonic Flow meter for applications in clean water and in low conductivity media. Operating principle based on transit time measurement.
Pipe material:Steel,Stainless steel,Cast iron,PVC,Cement pipe and allow pipe with lining
High Isolation voltage,Strong anti-interference,Suppress voltage noise,Good isolation performance
Inline ultrasonic flow meter collect temperature signal and accuracy reach 0.001¡æ
Viscosity:0.1~10m/s
Measuring cycle:50mS
Output:4~20mA,Pulse,OCT,RS485
Body material:Standard carbon steel,SS304 and SS316 are optional
Power supply:DC24V and AC220V

Q&T PLCM Open Channel flow meter is Ultrasonic non-contact Open channel flow meter, It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems. Sensor Material optional ABS, PVC, PTFE; Anti-corrosive with PTFE Probe.
Display: Backlight LCD
The maximum of Accumulative Flow: 9999999.9 m3/h
Accuracy of Change in Level: 1mm or 0.2% of full span (whichever is greater)
Resolution: 1mm
Analogue Output: 4-20mA, corresponding to instantaneous flow
Relays Output: Standard 2 relay outputs(Optional up to 6 relays)
Serial Communication: RS485, MODBUS -RTU standard protocol
Ambient Temperature: -40 ~70 Degree C
Measure Cycle: 1 second (selectable 2 seconds )
Power Supply: DC24V (+5%) 0.2A; AC220V (+20%) 0.1A ;Optional DC12V

Clamp-on ultrasonic liquid water flow meter proven transit-time ultrasonic measurement technology This technology can be used for permanent installations where intrusive flow meters are not economically viable for permanent installations on large pipelines and for all the different process fluids encountered in the network. Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm Measuring clean liquids Power supply: 24VDC/85VAC-2265AC Communication: RS485

Non Contact Digital LCD Display Modular Type Ultrasonic Flow Meter Modular type ultrasonic flow meter is one type of transmit-time ultrasonic flow meter. Customer don’t need cut off pipe. The ultrasonic flow sensor could be clamped on pipe and measure the flow rate directly. It have digital LCD display. And the menu could be operated by button. This type flow meter could be used on DN15-DN6000 pipe. And it could work on most of pipes except cement pipe.
Principle: Transit- time ultrasonic flow meter
Accuracy: ¡À1%
Operation: 4 keys operation
Signal output:
1 way 4~20mA output, electric resistance 0~1K, accuracy0. 1%
1 way OCT pulse output (Pulse width 6~1000ms, default 200ms)
1 way relay output
Signal input:
3 way 4~20mA input,signal could be temperature, pressure or liquid level

Ultrasonic Flow meter for applications in clean water and in low conductivity media. Operating principle based on
transit time measurement.
Bi-directional flow measurement over a wide dynamic range.
Applications with conductive or non-conductive liquids for many industrial
No moving parts, no wear, no pressure loss,Maintenance-free

Q&T Open Channel flow meter measures level, flow rate and total volume of water flowing through weirs, flumes and channels. The flow meters use a non-contact level sensor. Application field£º
1. Water and sewage treatment£ºpump room, collection well, biochemical reaction
tank, sedimentation tank.
2. Electricity, mines£ºmortar pool, coal slurry pool, butter storage tank, stockyard
or some mobile equipment control, etc.
3. Food industry£ºwineries, granaries, storage tanks for food materials, etc.

Specifications:
Display: Backlight?LCD
The?maximum?of Accumulative Flow: 9999999.9?m3/h
Resolution: 1mm
Analogue?Output: 4-20mA
Relays?Output: Standard?2?relay?outputs(Optional?up?to?6?relays)
Serial?Communication: RS485,?MODBUS RTU
Ambient?Temperature: -40 ~70 Degree C
Power?Supply: DC24V, AC 220V£»Optional?DC12V

Ultrasonic Open Channel Flow Meter for Water is used with weir tank to measure the water flow rate in the open-channel. This meter is mainly used to measure sewage plants, sewage outfall of enterprises and institutions, city sewer flows and irrigation channels.
Ambient Temperature: -40 ~70 Degree C
Measure Cycle: 1 second (selectable 2 seconds )
Power Supply: DC24V (+5%) 0.2A; AC220V (+20%) 0.1A ;Optional DC12V
Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

The ultrasonic open channel flowmeter has 4-20mA and RS485 signal output, it can be equipped with a communication interface, which is easy to connect with SCADA systems to achieve industrial remote monitoring and control. This Open Channel flow meter measures level, flow rate and total volume of water flowing through weirs, flumes, and channels etc.

Specifications:
Sensor?Level?Range: 0-4.0m; other?level?range?also?available
Blind?zone: 0.20m
Temperature?Compensation: Integral?in?probe
Pressure?Rating: 0.2MPa
Beam?Angle: 8*?(3db)
Cable?Length: 10m?standard?(can?be?extended?to?1000m)
Sensor?Material: ABS,?PVC?or?PTFE?(optional)
Sensor?Protection Class: IP68

NEW Version 220V AC wall mounted flow sensor water sonic FLOW METERSwidely used to measure different kinds of liquid.

Wall Mounted Ultrasonic Flow Meter consists of two parts: a transmitter unit and a transducer. Magnetic external clamps on the sensor are easy to install and connect to metal tubing for continuous flow measurement. It is especially suitable for on-site flow measurement of various pressure requirements. Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm Measuring clean liquids Power supply: 24VDC/85VAC-2265AC Communication: RS485

Transit Time Ultrasonic can work alone without a LCD andKeypad module,the module can be used alone as a flow meter.Users caneven integrate a number of the modules into a multi-channel flow meter thatcan measures up to several dozen of different pipes or a flow meter that has higher accuracy by measures the same pipe with all the channels.
Pipe material: Steel, stainless steel, cast iron, copper, cement, PVC, aluminum, glass fiber reinforced plastics, pipes with liner also work
Pipe diameter: 15~6000mm
StraightpipeInstallation condition: upstream10D, downstream 5D, 30D from the pump
Medium Liquid type: Single liquid that could transmit sound wave,
Sewage with small particle content;
Chemicals (alcohol, etc. ) Plant effluent; Beverage;
Ultra-pure liquids, etc.
Temperature: -30~160¡ãC
Turbidity: Not more than 10000ppm, few bubble
Flow rate: 0~¡À7m/s

Pipeline ultraosnic flow meter directly contact the liquid and make the measuring accuracy better than clamp on ultrasonic flowmeter.And installation easy,don’t need calculate the sensor installation distance and cover the coupling agent in the pipe,so this meter can collect the signal very well.
Accuracy:¡À1.0 %
Viscosity:0.1~¡À10m/s
Output:4~20mA,Pulse,OCT,RS485
Body material:Standard carbon steel,SS304 and SS316 are optional

This open channel ultrasonic flowmeter is low cost compared with other type open channel flow meter, we are the professional manufacturer of ultrasonic open channel flow meter from China.
And with non-contact type sensor, the meter has a higher reliability than other forms of the instrument, when under the dirt, corrosive liquids case.
Display: Backlight LCD
The maximum of Accumulative Flow: 9999999.9 m3/h
Accuracy of Change in Level: 1mm or 0.2% of full span (whichever is greater)
Resolution: 1mm
Analogue Output: 4-20mA, corresponding to instantaneous flow
Relays Output: Standard 2 relay outputs(Optional up to 6 relays)
Serial Communication: RS485, MODBUS -RTU standard protocol
Ambient Temperature: -40 ~70 Degree C
Power Supply: DC24V (+5%) 0.2A; AC220V (+20%) 0.1A ;Optional DC12V

Flowmeter digital portable handheld portable flow meter is a portable liquid flow measurement device with a sensor. Flowmeter digital portable handheld portable flow meter proven transit-time ultrasonic measurement technology for superior accuracy and ease of installation and installation. This easy-to-use flowmeter comes in a rugged, waterproof carrying case for easy transport of the display, sensor, and cables between measurement locations. High accuracy +/-1.0% of FS Transducer temperature: -30~90¡ãC/-30¡ãC~160¡ãC Measuring clean liquids Battery-powered,for 12 hours Communication: RS232

QT621 handheld type ultrasonic clamp on flow meters are with user-friendly design, with built-in Lithium battery provides up to 12 hours of measurement operation.
Portable ultrasonic flow meters can be easily moved and installed in different pipes and convenient to carry site to site, which is very convenient for users to monitor the data.

Size: 1¡å~48¡å(25mm~1200mm)
Flow Range:¡À0.01 m/s~ ¡À12 m/s
Accuracy: ¡À1%
Repeatability: 0.2%
Output: 4-20mA, RS485
Power supply: Internal lithium 3000mAh
Transducer: IP68

Q&T brand ultrasonic flow meter is real flow calibrated,5 flow velocity point and calibrate 3 times for each flow velocity point.Q&T calibration device can calibrate from DN3~DN3000mm,and adopt Seimens,Rosemount,E+H brand flow meter as the standard meter.
Single channel ultrasonic flow meter accuracy <1.0% Multi-channel ultrasonic flow meter caccuracy can reach 0.5%

Q&T Open channel flow meter is a High accuracy OEM available wastewater open channel meter, top quality 4-20mA and RS485 output, it need work together with weir, flume etc. Flow measurement on reservoir is a common application in which open channel flow measurement plays a role.
a set of 4-20 ma analog output
RS – 485 communication (Modbus RTU protocol) (optional)
IP67 protection class
AC 220 v and 24 v dc power supply (optional)
installation: split type, instrument hanging installation
sensor material: ABS plastic (PE/PTFE anti-corrosion material optional)

QT621 portable type ultrasonic clamp on flow meters use clamp-on transducers that are mounted externally on the surface of the pipe and which generate pulses that pass through the pipe wall.
Portable ultrasonic flow meters are widely applicated from simple water flow measurements to energy flow monitoring and automated process control.

Size: 1¡å~48¡å(25mm~1200mm)
Flow Range:¡À0.01 m/s~ ¡À12 m/s
Accuracy: ¡À1%
Repeatability: 0.2%
Output: 4-20mA, RS485
Power supply: Internal lithium 3000mAh
Transducer: IP68

QT621 Portable ultrasonic flow meter is a portable transit-time ultrasonic flowmeter with clamp-on transducers for non-invasive liquid measurement of clean homgeneous fluids.
Portable ultrasonic flow meter mainly consists of two parts, transmitter and transducer. With 4-20mA and RS485 communication available, QT621 ultrasonic flow meter support quickly verify the flow reading of another meter and to data log flow system values over an extended time period.

Size: 1¡å~48¡å(25mm~1200mm)
Flow Range:¡À0.01 m/s~ ¡À12 m/s
Accuracy: ¡À1%
Repeatability: 0.2%
Output: 4-20mA, RS485
Power supply: Internal lithium 3000mAh
Transducer: IP68

PLCM series ultrasonic open channel flow meter is a low cost choice. It is a hot sell product for river channel measuring. The product supports weirs or notches of different standards in various countries and can be widely used for measurement or monitoring of total water drainage.
Display: Backlight LCD
The maximum of Accumulative Flow: 9999999.9 m3/h
Accuracy of Change in Level: 1mm or 0.2% of full span (whichever is greater)
Resolution: 1mm
Analogue Output: 4-20mA, corresponding to instantaneous flow
Relays Output: Standard 2 relay outputs(Optional up to 6 relays)
Serial Communication: RS485, MODBUS -RTU standard protocol
Ambient Temperature: -40 ~70 Degree C
Power Supply: DC24V (+5%) 0.2A; AC220V (+20%) 0.1A ;Optional DC12V

Perfect Quality Economical Ultrasonic Flow meter insertion type ultrasonic flowmeter is a high precision no-cut tube measurement method. This special design includes matching sensors for ease of use and is ideal for installation in existing systems Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm Measuring single clean liquids Power supply: 24VDC/85VAC-2265AC Storage: SD card optional Heat meter optional

PLCM open channel flow meter is a Cost effective wastewater flow meter, 4-20mA output Open channel flow meter; it has been used a lot on agricultural irrigation, open channel diversion, municipal water supply and drainage, sewage treatment etc.
Display: Backlight LCD
Flow Rate Range: 0.0000~99999L/S or m3/h
The maximum of Accumulative Flow: 9999999.9 m3/h
Accuracy of Change in Level: 1mm or 0.2% of full span (whichever is greater)
Resolution: 1mm
Analogue Output: 4-20mA, corresponding to instantaneous flow
Relays Output: Standard 2 relay outputs(Optional up to 6 relays)
Serial Communication: RS485, MODBUS -RTU standard protocol

Flange ultrasonic flow meter could be manufactured from 50mm~700mm and mainly be used to measure the flow and heat of clean liquid which don’t contain large concentration of suspended particles or gas.
Accuracy:±1.0%
Heat measurement
Carbon steel body
Dual power supply:24VDC &220VAC
Flow velicity:0~±10m/s

Not affected by water quality, the solar power ultrasonic open channel flowmeter can be equipped with a communication interface, which is easy to connect with SCADA systems to achieve industrial remote monitoring and control. This Open Channel flow meter measures level, flow rate and total volume of water flowing through weirs, flumes, and channels etc.

Specifications:
Sensor?Level?Range: 0-4.0m; other?level?range?also?available
Blind?zone: 0.20m
Temperature?Compensation: Integral?in?probe
Pressure?Rating: 0.2MPa
Beam?Angle: 8*?(3db)
Cable?Length: 10m?standard?(can?be?extended?to?1000m)
Sensor?Material: ABS,?PVC?or?PTFE?(optional)
Sensor?Protection Class: IP68

The open channel flow meter level sensor is mounted on the top of the flume, and ultrasonic wave is transmitted by the probe to the surface of the monitored material. Instead of using mass or volumetric data to determine the rate of flow of a substance, open channel flow meters monitor the relationship between the depth of the liquid and the flow rate.

Specifications:
Sensor?Level?Range: 0-4.0m; other?level?range?also?available
Blind?zone: 0.20m
Temperature?Compensation: Integral?in?probe
Pressure?Rating: 0.2MPa
Beam?Angle: 8*?(3db)
Cable?Length: 10m?standard?(can?be?extended?to?1000m)
Sensor?Material: ABS,?PVC?or?PTFE?(optional)
Sensor?Protection Class: IP68

Ultrasonic flowmeter wall mounted water flow meter Modbus RS485 communication measure flow by propagating ultrasonic waves into a liquid-filled pipe. Ultrasonic flowmeter wall mounted water flow meter Modbus RS485 communication are located outside the pipeline and offer a wide range of pipeline sizes with no pressure loss, no contact with the liquid inside, and no moving parts. Accuracy: +/-1.0% of FS Wide range: DN15mm-DN6000mm None cut down pipe Power supply: 24VDC/85VAC-2265AC Communication: RS485

Inline ultrasonic flow meter could connect temperature sensor to become one calorimeter and widely be used in Process control, Production measurement, Trade settlement.
Ultrasonic flow meter mianly fro Condensate, Boiler feed water,Drink water etc
Input:Two-wire PT1000
Output:4-20mA,Pulse,OCT
Communication:RS485
Transmitter working temperature:-10~70¡æ
Sensor wotking temperature:-30~150