Non Contact ultrasonic level Sensor liquid level meter

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

The beam angle can reach 3¡ã, and the energy is more focused, effectively
avoiding false echo interference;
High frequency signal, can effectively measure the level of medium with low
dielectric constant (¦Å¡Ý1.5);
Strong anti-interference, almost unaffected by dust, steam, temperature and
pressure changes;

The magnetic flap level gauge is equipped with upper and lower limit switch outputs to realize remote alarm and limit control.
The magnetic flap level Transmitter is equipped with a transmitter, which can realize the remote indication, detection and control of the liquid level. According to the different installation positions of the container, there are two types of side mounting and top mounting.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

Ultrasonic fuel tank level sensor is a cost-effective and reliable solution for liquid and solid level tanks. QTLM model Ultrasonic level meter is consisted of sensor and transmitter. The transmitter adopt user-friendly design, support analog and HART communication,
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T Ultrasonic level transmitters are widely used for water, waste water level measurement. As one of the leading manufacturer, Q&T focus in the ultrasonic level transmitter’s production, test, packing etc. To ensure safety in shipment, QTLM series ultrasonic level transmitters are packed in safety export cartons with well protection.

This PTFE Liquid Level Sensor Sanitary Water Liquid Ultrasonic level meter has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Process pressure£º-0.1~0.5MPa
Measurement accuracy£º¡À1mm
Protection class£ºIP67
Explosion-proof grade£ºExib II CT6 Gb
Shell material£ºCast aluminum/stainless steel
Signal output£º4-20mA, HART (two-wire, four-wire), RS485 Modbus

Q&T Magnetic Level Gauge can be used to measure the liquid level of kinds of vessels in the shapes of water tower, kettle, groove and ball as well as boiler furnace. It can be used under highsealing, leak prevention, high pressure, high temperature and corrosion condition, which is safe and reliable. It makes up for the deficiency of fuzzy instruction and fragility of the glass plate level gauge.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

Ultrasonic fuel tank level sensor is a non contact level measurement device, with over voltage, over current protection and lightning protection.
Liquid tank level sensor made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.
Level Range:4-30m
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM series Ultrasonic level meter is a non-contact level measurement device with the features of high reliability, cost-effective, easy to install.Ultrasonic technology is a good choice for level applications that require low cost, non-contact liquid slurry and solid level measurement. Especially for sewage treatment, paper pulp, urban water supply etc.
Probe material: ABS/PVC/PTFE
Level Range: 4m, 6m, 8m, 10m, 12m, 15m, 20m, 30m
Accuracy: 0.5%-1.0%
Resolution: 3mm or 0.1%
Display: LCD display
Analog Output: Two wire 4-20mA (250ohm Load)
Power Supply: DC24V
Environmental Temperature: Transmitter: -20 ~ + 60 degC
Sensor: -20 ~ + 80 degC

This 4-20mA output PTFE Liquid Level Sensor Q&T Beer Milk level Meter is used to measure the water,beverage or chemical liquid level. This ultrasonic level transmitter has been widely used on food industry, sewage plants, channel, river level monitoring etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Ultrasonic level transmitter is a very stable measurement device,not influenced by the measuring medium properties. Q&T design economical ultrasonic level meter adopt Intellectual signal treatment technology, guarantee that the instrument
meets various kinds of operating occasion.
Level Range:4-30m
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

The product has extremely high measurement accuracy, suitable for high-precision measurement level measurement
The product has rich echo processing algorithms and empirical data of various working conditions; it has unique advantages than other similar products in the application of extremely harsh working conditions such as strong dust, steam, or special process storage tanks with stirring and heating rods.

QTLM series Ultrasonic level meter is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver, by a piezoelectric crystal or a magnetostrictive device into an electrical signal by transmitting and receiving sound waves to calculate the time between the sensor surface to the distance measured liquid. QTLM series Ultrasonic level meter adopt Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Water tank fuel oil level sensors are with the feature of non-contact and maintenance-free. QTLM ultrasonic level gauge is a cost-effective and reliable solution for liquid, solid level measurments. Q&Tdesign with humanized LCD show window which is easy to debug, observe and installed conveniently.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic fuel tank level sensor is microprocessor controlled digital level meter. Ultrasonic pulses generated by the sensor (transducer) emitted in the measurement, the surface acoustic wave after reflection by the liquid receiving same sensor or an ultrasonic receiver.
Two wire ultrasonic level meter support 4-20mA two wire output, which is widely used in water, fuel tank, food tank, solid level application.
Level Range:4-30m
Resolution:3mm or 0.1%
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Process pressure£º-0.1~0.5MPa
Measurement accuracy£º¡À1mm
Protection class£ºIP67
Explosion-proof grade£ºExib II CT6 Gb
Shell material£ºCast aluminum/stainless steel
Signal output£º4-20mA, HART (two-wire, four-wire), RS485 Modbus

Q&T sanitary ultrasonic level Gauge is a digital level meter with high- performance microprocessor to process signals; It meets the requirements of material level without the contact. It can be widely used for level measurement of municipal river, urban groundwater level, sewage treatment station, water works, etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

QTLM ultraonic level sensor ideal for high-accuracy, continuous level measurement of a wide variety of liquids in storage and shipping containers requiring a non-contact measurement solution,widely used for liquid, slurry and solid level tank.QTLM ultraonic level meter measuring range up to 30 m.Easy and flexible mounting combined with high chemical compatibility.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic fuel tank level sensor adopt ultrasonic technology is a good choice for level applications that require low cost, non-contact liquid slurry and solid level measurement. Especially for sewage treatment, paper pulp, urban water supply etc.
Ultrasonic level transmitter support 4-20mA two wire and HART communication, which is very convenient for customer’s application.
Range:4-30m
Output:4-20mA/HART
Connection:Thread/Flange
Power:DC24V
Accuracy:0.5%
Protection:IP65

QTLM series Ultrasonic level meter adopt a scientific echo tracking algorithm to effectively capture the true echo.The internal temperature compensation (speed, frequency) makes the measurement more accurate and reliable.it has Analog quantity, switch output;The measurement is not affected by the liquid density and the electrical characteristics of the material.Electronic equipment can be replaced without opening the tank.There are many reasons why QTLM ultrasonic level devices are the industry standard for so many applications.
Accuracy. Price point. Durability. Ease of use.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Q&T offers Magnetic Level Gauges in top-bottom, top and side mounted construction with two types of indicator systems. Magnetic Level Gauge is consists of three major components: Float Chamber, Float and Indicator System; It also can add the reedchain for an analog output signal, that’s 4-20mA Magnetic Level Indicator.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

humidity: ¡Ü95%RH
Enclosure: Aluminum alloy, stainless steel
Antenna type: Lens antenna/anti-corrosive antenna / flange isolated by quartz
Process temperature: -40~85¡æ; -40~200¡æ;
Process pressure: -0.1~2MPa
Product Size: ?100*270mm
Cable entry: M20*1.5
Protection class: IP67
Explosion-proof grade: ExdiaIICT6
Installation method: Thread or flange

Non contact ultrasonic level meter with the features of non-contact, high reliability, cost-effective, easy to be installed and maintained. QTLM ultrasonic level gauge widely used for liquid, slurry and solid level tanks, support various connections like thread or flange connection type.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultrasonic level transmitter all input and output lines must be with such protection functions as lightning protection ,use the time of flight measuring principle and short circuit prevention,it adopt Advanced since the clamp type terminal, to ensure that wiring never loose.
QTLM Liquid tank level sensor wave spread speed among gas is influenced by gas temperature, When level meter works, it measures gas temperature needing, compensates for the velocity of sound, so as to ensure the precision of measuring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic level tank meter is a very popular model in sewage treatment, paper pulp, urban water supply etc. QTLM Ultrasonic level meter could be easily configured by button and provide accurate real-time measurement. Adopt advanced terminal, to ensure that wiring will not loose.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

4-20mA Ultrasonic level sensor is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. Q&T Ultrasonic level meter is a cost-effective and reliable solution. For measuring liquid and solid level at ranges of up to 30 meters.
Range:4-30m
Application:Liquid / Solid
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Frequency Range£º76~81GHz
Scope of application£ºStrong corrosive liquid level, stirring, water vapor condensation
Measuring range£º120m
Process connection£ºflange, thread
Medium temperature£º-40~120¡æ

QTLM ultraonic level sensor ideal for high-accuracy, continuous level measurement of a wide variety of liquids in storage and shipping containers requiring a non-contact measurement solution.QTLM ultraonic level meter measuring range up to 30 m.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

This Milk level 4-20mA output Liquid Ultrasonic Tank Level Gauge is used to measure the water,beverage or chemical liquid level. This ultrasonic level transmitter has been widely used on food industry, sewage plants, channel, river level monitoring etc.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD