low cost propane civil boiler natural gas PNG gas turbine gas flowmeter

turbine flowmeter Calibration of the device is carried out in laboratory conditions on the water.
If the device is supposed to be used in a viscous medium (2-300 cSt, centistokes), liquids with properties similar to those of the working medium are taken for calibration.
As a result, for each purpose and medium its own K-factor is assigned. Sometimes, manufacturers add ready-made universal viscosity charts for calibration to its equipment kit. Using them, a user can quickly determine already calculated K-factor for different substances.

Turbine flow meters are mechanical meters that have a freely rotating turbine set in the path of a fluid stream. The flowing liquid or gas causes the turbine to spin upon its axis. The rate of spin will be proportional to the velocity of the flow. Turbine flow meters are simple and reliable. They are able to measure high flow rates with low-pressure loss. Though versatile, turbine meters do best in applications with constant conditions in liquids such as water or lower viscosity fluids.

preprocess applications.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

QTWG turbine gas flow meters are designed to accurately measure natural gas, air, nitrogen, carbon dioxide, propane vapor, and other non-corrosive gases for large volume commercial and industrial uses. they are ideal flow measurement device for clean gas, including natural gas, LPG gas etc. With user-friendly display, support of flowrate, temperature, pressure each in operating and standard status. Turbine gas meters support a wide range of measurement including maximum working pressure and maximum measuring flow rate.

Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

Turbine Flow Meter is a volumetric measuring turbine type of Impeller Flowmeters, made up of sensors and Convertor. The flowing fluids engage the rotor causing it to rotate at an angular velocity proportional to the fluid flow rate. The Sensor reacts to the average velocity of fluid with the multi-blades rotor so as to speculating the flow value and the accumulative flow value
liquid turbine flow meter is a volumetric metering the meter consists of a rotor and bearing assembly Suspended on a shaft, which is mounted to a support device.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

Natural gas flow meter is used to measure gas flow, with the features of high accuracy, low-pressure drop. Gas turbine flow meter provides high-quality natural gas measurement which could increase efficiency in boiler/burner control, fuel-to-air ratio, and custody transfer applications.
Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5%/1.0%

turbine flow meter is a new generation of turbine flow meters with the advantages of simple structure, light weight, high precision, good reproducibility, sensitive response, convenient installation, maintenance and use. It is widely used. It is not corrosive to stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al203 and cemented carbide in the measurement of closed pipelines, and there is no fiber, particles and other impurities. The kinematic viscosity of the liquid is less than 5*10-6©O/s at working temperature. For the kinematic viscosity For liquids larger than 5*10-6©O/s, the flow meter can be used after real liquid calibration. If matched with a display instrument with special functions, it can also be used for quantitative control, overweight alarm, etc., an ideal instrument for flow measurement and energy saving.

preprocess applications.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

Liquid Turbine Flow, is the turbine flow meter that suitable for liquid flow rate measurement. Like water flow, Diesel flow. Turbine flow meter is the most popular equipment to measure flow electronically. They offer a wide flow and application rangeability. Turbine Flow Meters are easy to maintain, durable and versatile.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%;
OUTPUT: PULSE+4-20mA;
Digital Communication:RS485, MODBUS; HART

Turbine flow meters measure the velocity of liquids, gases and cryogenic fluids. Typical fluids and gases measured with turbine flowmeters include hydrocarbons, chemicals, water, cryogenic liquids, air, natural gas and industrial gases.Apure turbine flowmeters are easy to operate and maintain. For this reason, Apure turbine flowmeters can be used worldwide and are considered a reliable, cost-effective way to achieve high-precision flow measurements
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

QTWG Turbine gas meter is a popular device for gas-fired, gas pipeline network and city gas field etc. Turbine gas meters deliver high accuracy in gas flow measurements, which could highly inrease the efficiency in various custody transfer applications.

Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

The Liquid Turbine Measuring Principle Is Used In A Wide Range Of Different Branches Of Industry, Chemicals, Petrochemicals, Oil And
Gas, Food, And ¨C No Less Importantly ¨C In Custody Transfer Applications. Liquid Turbine Flowmeters Can Measure Virtually All Fluids: Cleaning Agents, Fuels, Vegetable Oils, Solvents, Silicon Oils, Fruit Solutions, Vinegar, Alcohol
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

turbine flow meter refers to the turbine flow sensor with 50mm size. DN50 turbine flow meter can be used to take volumetric flow measurement of petroleum, organic liquid, biogas, LPG gas, liquefied gas, natural gas, hydrocarbon gas, nitrogen, cryogenic fluid, water, diesel, High-pressure hydraulic oil, methanol and other non-impurity, non-corrosive. 2 inch turbine flow meter has many applications in turbine heating systems, boilers measurement of water supply, heat exchange system, air conditioning circulating water, etc.

QTWG series natural gas flow meters offer high quality measurement solution for clean gas which could increase efficiency in gas transmission, distribution and industrial applications. Turbine gas meters are with lightweight and compact body and support a wide range of measurement including maximum working pressure and maximum measuring flow rate.
Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

turbine flowmeter advantage
1.High accuracy, generally up to ¡À1%R, ¡À0.5%R, high accuracy up to 0.2%R
2.Good repeat-ability, short-term repeat-ability up to 0.05% ~ 0.2%, in the trade settlement is the preferred choice of flow meter.
3.Output of pulse frequency signal, suitable for totalizer and connection with PC; no zero shift and strong interference resist
4.High frequency signal(3~4KHz) can be obtained, the signal resolution is strong.
5.Wide range, medium and large diameter up to 1:20, small caliber 1:10.

Gas turbine flow meter is a new generation of flow measurement device for clean gas, including natural gas, LPG gas etc. Normally LPG gas flow meter need to be with temperature and pressure compensation so that to make sure high accuracy.
Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5%/1.0%

QTWG series turbine gas meters with electronic totalizer and integrated temperature and pressure compensation. Turbine gas meters with built-in battery operation, with external power supply optional. With display of pressure, temperature, flowrate, totalizer etc.

Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

QTWG turbine gas meter is a type of high-precision custody transfer metering. As a ideal flow measurement device for natural gas or other non-corrosive gases applications, gas turbine flow meter urbine could be automatically pressure and temperature compensation to obtain volumetric measurements in standard units.

Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

intelligent liquid turbine flow meter is a new type of intelligent instrument with integrated turbine flow sensor and display product calculation developed by advanced ultra-low power single-chip microcomputer technology, which has obvious advantages such as compact mechanism, clear reading, high reliability, undisturbed by external power supply, lightning resistance and low cost.liquid turbine flow meter widely used in petroleum, chemical, metallurgy, water supply, paper-making and other industries. It is an ideal meter for flow metering and energy saving
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

Turbine flowmeter measures the flowrate from the number of revolutions of a blade placed in the flow. The speed of revolutions of the blade with an axis parallel to the flow direction is proportional to the speed of the flow. Utilizing the capability of highly accurate measurement for wide range of viscosity, the turbine flowmeter is useful for process control, transactions as well as process control of petroleum products, general chemical fluids, liquefied gas, water, etc.

liquid turbine flow meter, is a precision flow measuring instrument,that can be used to measure the flow and total volume of liquids. The structure is explosion-proof and can show the total flow, instantaneous flow and percentage of flow fullness. It is widely used in measurement and control systems in petroleum, chemical, metallurgical, scientific research and other fields. Sensors equipped with sanitary fittings can be used in the pharmaceutical industry.

Turbine flow meters measure the velocity of liquids, gases and cryogenic fluids. Typical fluids and gases measured with turbine flowmeters include hydrocarbons, chemicals, water, cryogenic liquids, air, natural gas and industrial gases.Apure turbine flowmeters are easy to operate and maintain. For this reason, Apure turbine flowmeters can be used worldwide and are considered a reliable, cost-effective way to achieve high-precision flow measurements
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

QTLL series rotary gas meters are suitable for custody transfer gas measurement of all non-corrosive gases such as natural gas, propane, butane, air, hydrogen etc. Lobed rotary meter is an inexpensive, lightweight, compact, highly accurate gas meter.
Size:DN25-200mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Installation: Vertical or Horizontal
Accuracy:1.5% or 1.0%

QTWG turbine gas flow meters are ideal flow measurement device for clean gas, including natural gas, LPG gas etc. Turbine gas meters are very stable measurement device which could achieve high-precision custody transfer metering, could be automatically pressure- and/or temperature-compensated.
Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

tubine flowmeter is Composed of turbine flow sensor and display instrument, it is one of the ideal flow meters for liquid measurement. The flowmeter has the characteristics of simple structure, high accuracy, convenient installation and maintenance, etc. This product is widely used in petroleum, chemical, metallurgy, water supply, papermaking, environmental protection, food and other fields. Impurity liquid. If used in conjunction with a display instrument with special functions, it can be used for automatic quantitative control, excess alarm and other purposes.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

liquid turbine flowmeter, as fluid flows through turbine rotor and drives it to rotate, the rotating rotor periodically cuts magnetic field line to generate electric pulse signal, which can be transmitted to output and transferred to the meter to display flow rater or totalizer. It features in high accuracy, good repeatability, simple structure, low pressure loss, convenient maintenance, etc.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%/¡À0.2%;
OUTPUT: PULSE/4-20mA;
Digital Communication:RS485, MODBUS; HART

QTLL series rotary gas meters a high-quality positive displacement roots-type gas meter which is available in a variety of sizes and options. Rotary gas meters adopt high-precision digital temperature sensor, digital pressure sensor which make sure the good performance.
Size:DN25-200mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Installation: Vertical or Horizontal
Accuracy:1.5% or 1.0%

turbine Flow meter for diesel is specially designed for usage in water, alcohol, diesel, gasoline and other fluid measurement and control systems. They operate according to the turbine principle, i.e. the speed of an impeller turning in the fluid flow is measured and converted into pulse or 4-20mA signals.

turbine flow meter accuracy plays an important role in the floating measurement process of the rotor. So the high-precision turbine flowmeter has almost no resistance during the floating measurement process of the rotor, thereby ensuring the high precision, linearity and durability of the turbine flowmeter.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%;
OUTPUT: PULSE+4-20mA;
Digital Communication:RS485, MODBUS; HART

QTWG series gas turbine flow meter is is designed to measure natural gas, LPG gas, other clean gases accurately. Turbine gas meters
have the characteristics of low pressure loss, high accuracy,anti vibration and widely range ratio etc. With the ability of increasinig efficiency in boiler/burner control, fuel-to-air ratio, and custody transfer applications.
Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

QTWG series turbine gas flow meters are designed to measure natural gas, air,propane and other clean gases in industrial and commercial billing applications. Gas turbine meters provide fast response to changing flow rates with consistent accuracy and various kinds of outputs including 4-20mA, pulse and RS485.

Size:DN25-400mm
Material:Aluminum alloy or stainless steel
Dual Power:3.6V battery powered+DC24V
Output:4-20mA,Pulse,RS485
Accuracy:1.5% or 1.0%

Turbine flow meters are mechanical meters that have a freely rotating turbine set in the path of a fluid stream. The flowing liquid or gas causes the turbine to spin upon its axis. The rate of spin will be proportional to the velocity of the flow. Turbine flow meters are simple and reliable.
Process Connection£ºThread/Flange/Clamp
Sensor Material£ºSS304, SS316L Optional
ACCURACY:¡À0.5%;
OUTPUT: PULSE+4-20mA;
Digital Communication:RS485, MODBUS; HART