industry ultrasonic liquid level sensor acid tank level transmitter

Frequency: 76GHz ~ 81GHz, 5GHz FMCW bandwidth
Measuring range: 0.3 m ~ 60m
0.08m~30m
0.6m ~ 120m
Measurement accuracy: ¡À1mm
Beam angle: 3¡ã/8¡ã
Power: 15~28VDC
Communication: MODBUS
HART/Series
Signal output: 4 ~ 20mA or RS-485

Ultrasonic fuel tank level sensor is integrated design, with big show window of LCD which is easy to debug, observe and installed conveniently.
Ultrasonic level gauge adopt Advanced since the clamp type terminal, to ensure that wiring never loose.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM Series Ultrasonic level transmitter time of flight measuring principle, the sensor emits the ultrasonic wave to measure the distance by measuring the time between the wave emission and reception. Water tank fuel oil level sensor is compact version, loop-powered 4-20mA for continuous measurement of liquid and solid tanks. it is safe and clean, with high precision and long service life, stable and reliable.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

80G radar level meter is FMCW radar operating at 76-81 GHz, which has a maximum measuring range of 120m and a minimum blind zone of 8cm. It supports 4-wire and 2-wire applications. Higher operating frequency and shorter wavelength make it ideal for solid applications,

Ultrasonic level gauge is a kind of continuous level measurement device. It support direct reading on the LCD display, and output 4-20mA and HART. 4-20 mA output is easily monitored by a PLC or other controller.
Two wire ultrasonic level meter is widely used for liquid, slurry and solid level tank, with the feature of Non-contact and maintenance-free.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM series Ultrasonic level transmitter adopt the time of flight measuring principle, widely used for liquid, slurry and solid level tank,Especially for sewage treatment, paper pulp, urban water supply etc. Integrated temperature compensation improves accuracy, with built-in 4-20mA and HART communication,4-20mA ultrasonic level sensor adopt advanced clamp type terminal, to ensure that wiring never loose and remains accurate.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

PTFE Liquid Level Sensor RS485 Sanitary Ultrasonic Water Tank Level Meter is a good choice for application such as Dam water level monitoring,River monitoring, Pool water level monitoring, Environmental water level monitoring; It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

This PTFE Liquid Level Sensor Sanitary Water Liquid Ultrasonic level meter has the feature of Integrated design, installed conveniently; This Water Liquid Ultrasonic Tank Level meter, built-in temperature compensation can effectively compensate the influence of external temperature change on sound speed, and ensuring the measurement accuracy.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

4-20mA Ultrasonic level sensor is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. Q&T ultrasonic fuel tank level sensor made of waterproof engineering plastics, is small and firm with ABS probe. Therefore, it is applicable for various fields concerning level measuring and monitoring.
Level Range:4-30m
Output:4-20mA/HART
Connection:Thread/Flange
Power:DC24V
Accuracy:0.5%

Ultrasonic level transmitters are with the feature of non-contact and maintenance-free, a cost-effective and reliable solution for liquid, solid level measurments. QTLM ultrasonic level meters are with humanized LCD show window which is easy to debug, observe and installed conveniently.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Process pressure£º-0.1~0.5MPa
Measurement accuracy£º¡À1mm
Protection class£ºIP67
Explosion-proof grade£ºExib II CT6 Gb
Shell material£ºCast aluminum/stainless steel
Signal output£º4-20mA, HART (two-wire, four-wire), RS485 Modbus

Magnetic level gauge work on the principle of buoyancy, the float moves up and down with the rise and fall of the liquid level in the measuring tube, therefore the level in the measuring chamber will be the same as the level in the silo/vessel. The measuring chamber is fitted with a float, which has a magnet inside.
Measuring range: 300¡«15000mm
Measurement accuracy: ¡À5mm or ¡À10mm
Working pressure: 1.0, 1.6, 2.5, 4.0, 6.4 ,10,16.0MPa
Working temperature: ¡Ü550¡æ
Medium viscosity: ¡Ü0.02Pa.S
Output signal: two-wire system 4¡«20mADC or HART protocol or four-wire system 485 digital output
Explosion-proof grade: Exdll CT6
Protection level: IP66

QTLM series intelligent external ultrasonic liquid level meter is a kind of non-contact instrument to measure the liquid level of storage tank. The instrument can measure the dynamic liquid level in real time from outside the tank without damaging the tank and fire-free.When installed, the instrument can be installed and maintained in real time without using flanges, without opening
the tank and without touching the liquid, it is a complete non-contact liquid level meter in practical sense. And a large number
of oil refining, chemical, pharmaceutical, dangerous goods storage and transportation industries are widely used.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM series Ultrasonic level meter is digital type non contact level measurement for liquid, solid etc.Ultrasonic level meter could meet most of the level measurement requirements. Material. It support various connections like thread or flange connection type which is much easier for user.
Level Range: 4m, 6m, 8m, 10m, 12m, 15m, 20m, 30m
Accuracy: 0.5%-1.0%
Resolution: 3mm or 0.1%
Display: LCD display
Analog Output: Two wire 4-20mA (250ohm Load)
Power Supply: DC24V
Environmental Temperature: Transmitter: -20 ~ + 60 degC
Sensor: -20 ~ + 80 degC
Working Pressure: Ambient pressure
Communication: HART

Higher signal-to-noise ratio, almost unaffected by level fluctuations;
The measurement accuracy is millimeter-level accuracy (1mm), which can be
used for metrology-level measurement;
The measurement blind area is small (3cm), and the effect of measuring the liquid
level of small storage tanks is better.

Q&T Water Tank ultrasonic Level Gauge is a good choice for application such as Dam water level monitoring,River monitoring, Pool water level monitoring, Environmental water level monitoring; It has Multiple Output: 4-20 mA, relay and RS485 etc; easily connect up to most systems.

Specifications:
Measuring Range: liquid: 0.2-30 m
Process Connection: G2 Thread/ M95*2.0
Energy Transducer Material: ABS, PVC, PTFE
Temperature: -40~ 75 Deg C
With automatic Temperature compensation.
Process Pressure: ¡À 0.1MPa
Precision: 0.2% of actual range
Signal output: 4-20mA (Option:HART)
Power Supply: DC20V~32V ¡Ý30mA
Mode of Indication: 4 Digit LCD

Measuring Range:100m
Frequency Range: 80GHz
Output: 4-20mA/HART
Accuracy: ¡À15mm
Process Pressure: -0.1 ~ 4 MPa
Housing material: Stainless Steel
Process connectio: Flange

Application: Liquid: mildly/strongly corrosive liquid
Measuring range: 30m / 100m
Process connection:Thread
Process temperature: (-40¡«90)¡æ
Process pressure: (-0.1¡«0.1)MPa
Accuracy: ¡À2mm / ¡À10mm
Antenna/Material: Lens antenna / PP or PTFE
Frequency rate: 80GHz
Explosion-proof grade: Exia IICT6 / Exd IICT6

QTLM series Ultrasonic level measuring instrument, taking the advantages of various level measuring instruments, is a universal one characterized by total digitalized and humanized design. It has perfect level monitoring, data transmission and man-machine communication.it is a good choice for process or control automation applications can be monitored via local display or remote PLC .the transmiter has big show window of LCD which is easy to debug, observe and installed conveniently.
Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM ultrasonic level transmitter is featured by strong anti-interference performance; free setting of upper and lower limits and online output regulation, on-site indication. The cover, made of waterproof engineering plastics, is small and firm with ABS probe or PTFE probe selectable . Therefore, it is applicable for various fields concerning level measuring and monitoring.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM series non contact ultrasonic level meter use the time of flight measuring principle, the sensor emits ultrasonic pulses in the direction of the medium, the pulses bounce from the surface of the medium and then reflects the ultrasonic pulses back. Ultrasonic fuel tank level sensor adopt Intellectual signal treatment technology, guarantee that the instrument meets various kinds of operating occasion.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

Ultrasonic level meter is one of the Ultrasonic technology level products which offers an affordable two wire and line powered version for non-contact level measurement of liquids and slurries for level, distance etc.
Measurements of level, distance is easily configured through the menu driven display.
Range:4-30m
Application:Liquid / Solid
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM Series Ultrasonic level meter is a kind of non contact level measurement device which are widely used in liquid or solid application.One machine can handle various conditions.QTLM Liquid tank level sensor is made up of ABS probe or PTFE probe selectable, with acid and alkali resistance and safety installed in bad environment.

Level Range:4-30m
Sensor:ABS/PVC/PTFE
Output: 4-20mA/HART
Power:DC24V
Accuracy:0.5%

The product has a wealth of echo processing algorithms and empirical data of
various working conditions; it is used for extremely harsh working conditions such as
strong dust, steam, or special process storage tank applications such as stirring and
heating rods, which are not available in other similar products unique advantage.

76GHz-81GHz FM wave radar
5GHz ultra-large FM scanning frequency width, wide application
Support standard HART, RS485 / MODBUS bus protocol
Support operation mode such as upper computer setting software, tank side table, etc.
24VDC power supply
Simple installation structure, adapt to various installation forms on site

Each gas vortex flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

QTLM 4-20mA ultrasonic level sensor is a kind of continuous measurement of fluids that do not contain foam, vapors, fumes or gases. Support analog and HART communication, which is widely used in water, fuel tank, food tank, solid level application. Ultrasonic level meters are with the ability to provide critical data of processes through PLC control device.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

QTLM Series Ultrasonic level meters are widely used in liquid or solid application. Ultrasonic level transmitter support 4-20mA two wire output and HART communication, which is very popular and convenience for user’s system, with the ability to control and monitor.
Range:4-30m
Application:Liquid / Solid
Sensor: ABS/PVC/PTFE
Output:4-20mA/HART
Power:DC24V
Accuracy:0.5%

humidity: ¡Ü95%RH
Enclosure: Aluminum alloy, stainless steel
Antenna type: Lens antenna/anti-corrosive antenna / flange isolated by quartz
Process temperature: -40~85¡æ; -40~200¡æ;
Process pressure: -0.1~2MPa
Product Size: ?100*270mm
Cable entry: M20*1.5
Protection class: IP67
Explosion-proof grade: ExdiaIICT6
Installation method: Thread or flange

Q&T 4-20mA Ultrasonic level transmitters deliver reliable and stable readings in actual work sites. To make sure fast delivery, Q&T factory has more than 20 pieces for each model, which could ensure the fast delivery. For all the level meter orders, Q&T engineers and workers will test each piece well before packing.