Compressed air remote type wafer vortex flow meter

Steam flow meter low price popular in all over the world for steam measure,it also called as steam flowmeter,it transfers data via 4-20mA,HART,RS485 realize wireless communication. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Air vortex flowmeter operate under the vortex shedding principle,where an oscillating vortexes occur when a fluid flow past a bluff (as opposed to streamlined) body,also call as shedding flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%

Vortex flow meter also could use for flue gases, carbon dioxide, fully demineralized water, solvents, heat-transfer oils, boiler feedwater, condensate water, etc.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Power Supply: DC 12-30V or 3.6V battery powered

Vortex steam flowmeter has flange,wafer,triclamp,insertion connection etc,steam vortex flow meter output signals 4-20mA, pulses, HART or MODBUS? RTU are available. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Pressure: 86kPa -106kPa

Vortex shedding flow meter states that when flow passes by the bluff body,will generated swirl,flow meter vortex is widely used in petrol,chemical industry,light industry and power heat supply. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Each vortex shedding flowmeter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every flow meter vortex. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Vapor vortex flowmeter use for liquid measurement,under strict calibration with liquid test bench for liquid vortex flow meter,enjoy ¡À1% accuracy in actual measurement. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)
Relative Humidity: ¨Q85%
Power Supply: DC 12-30V or 3.6V battery powered

Vortex Flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe.The number of swirls are proportional to the volumetric flow in the pipe.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered
Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Q&T vortex liquid mass flowmeter will enjoy good Linearity, Repeatability and accuracy level under professional calibration,each of QT vortex meter will under strict calibration before delivery. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Intelligent vortex flow meter will enjoy good Linearity, Repeatability and accuracy level under professional calibrastion, each of QT vortex meter will carry out calibration before leave factory. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Ambient Condition: Ambient temp: -40¡æ~65¡æ (Non-explosion-proof site), -20¡æ~55¡æ (Explosion-proof site)

Gas vortex flow meter specially for gases and liquids flow measurement in industry pipeline,gas vortex flowmeter enjoy higher accuracy compare with orifice plate. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Steam flow meter with low price specially for superheated steam in pipeline,mass flowmeter steam flow meter for custody transfer purpose compare with other gas flow meter. Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vapor vortex flowmeter adopt Japan technology,the accuracy and stability are well improved,steam flow meter enjoy ¡À0.75% of reading in liquids, ¡À1.0% in steam or gas. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Relative Humidity: ¨Q85%

Steam flowmeter is applicable for liquid or gas measurement,the calibration is different for vortex air flow meter and liquid vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vapor vortex flowmeter with accuracy ¡À1.5%,steam flow meter is workable with liquid or gas measurement,the calibration medium is different base on actual medium. Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa
Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Vortex liquid flowmeter has the sanitary connection, the triclamp could remove during calibration,sanitary vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Steam flowmeter adopt gas venturi nozzle system do the calibration,accuracy with ¡À1.0%, every vortex meter will be well calibrated before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Vortex air flow meter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every air flowmeter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Vortex steam flow meter adopt military regulations proved SS316 sensor, guarantee the accuracy and stability of versatile vortex flowmeter in measuring liquid or gas fluid. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Flowmeter vortex specially for flow measurement of gases and liquids in industry pipeline,vortex liquid mass flow meter requires strict calibration with higher accuracy before leave factory. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Pressure: 86kPa -106kPa

Insertion vortex flow meter adopts Japan technology,with military regulation SS304 or SS316 sensor, guarantee the accuracy and stability of steam flowmeter. Size: DN15-DN6000;
Accuracy: ¡À1.0 % (Flange/wafer/thread/tri-clamp; ¡À1.5%(Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Steam vortex flow meter states that when flow passes by a bluff body,swirling will generated，flow meter is widely used in petrol, chemical industry,light industry and power heat supply and so on.
Measured medium: liquid,gas,steam; Medium Temp: -40℃~250℃,-40℃~350℃,
Accuracy: ±1.0 % (Flange / wafer / thread / tri-clamp;
±1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ≦85%
Pressure: 86kPa -106kPa
Power Supply: DC 12-30V or 3.6V battery powered
Signal Output: 4-20mA,Pulse ”

Vortex steam flow meter has the sanitary connection, the triclamp could remove during calibration,triclamp vortex flow meter applicable for RO water, juice or other mediums. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Air flowmeter vortex flowmeter appilable for gases, steam and liquid applications. flowmeter is ideal for measuring saturated and superheated steam in factroy and improve steam production efficiency. Measured medium:liquid,gas,steam;Medium Temp:-40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy:¡À1.0 %(Flange/wafer/thread/tri-clamp; ¡À1.5 %(Insertion type) Flow Range:Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
IEP ATEX: II 1G Ex ia IIC T5 Ga
Relative Humidity: ¨Q85%
Pressure: 86kPa -106kPa

Each Inline vortex flow meter will under strict calibration then could guarantee better accuracy,with gas venturi nozzle realize field real flow calibration for every vortex flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam;
Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp,¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s
Specifications: DN100-2000 (Insertion)
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Air flow meter vortex flowmeter adopt military regulations proved SS316 sensor, guarantee the accuracy and stability of versatile vortex flow meter in measuring liquid or gas fluid. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type) Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Power Supply: DC 12-30V or 3.6V battery powered

Flange vortex flow meter is applicable for liquid or gas measurement,the calibration is different for gas vortex flow meter and liquid vortex flow meter.
Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp, ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse
Communication: RS485 MODBUS or HART

Air flowmeter vortex flowmeter is workable for liquid or gas measurement,the calibration is different for gas vortex flowmeter and liquid vortex flow meter. Size: DN15-DN6000; Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional) Signal Output: 4-20mA,Pulse Communication: RS485 MODBUS or HART

Palm oil vortex flow meter popular in all over the world in steam measure,vortex flow meter also called as steam flowmeter,flowmeter transfer data via 4-20mA,HART,RS485 etc. Size: DN15-DN6000
Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Accuracy: ¡À1.0 % (Flange / wafer / thread / tri-clamp; ¡À1.5 % (Insertion type)
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g

Q&T vortex liquid mass flow meter calibration adopt the pulse signal to calibrate the vortex flow meter, 5 testing points and each points run three times to guarantee the accuracy. Measured medium: liquid,gas,steam; Medium Temp: -40¡æ~250¡æ,-40¡æ~350¡æ,
Nominal Pressure: 1.6MPa
Flow Range: Liquid:0.4-7.0m/s,Gas:4.0-60.0m/s,Steam:5.0-70.0m/s,
Specifications: DN100-2000 (Insertion),
Material: SS304(Standard),SS316(Optional)
Vibration Acceleration Allowed: ¨Q0.2g
Relative Humidity: ¨Q85%