0.2% Accuracy Oval Gear Flow Meter for Diesel Oil

Oval gear flow meter is one of positive displacement flow meter and is mainly composed of meter shell, oval gear rotor and converter. This oil flow meter is an instrument used for continuous or discontinuous metering and control of liquids in the pipeline. The oval gear flow meter has advantages of large metering range, excellent accuracy, small pressure loss and high viscosity adaptability.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

The Mechanical oval gear oil flow meter has good performance on measuring high-temperature and high-viscosity liquids. The flow measurement is independent of the flow state of the fluid. This is because the oval gear flowmeter is metered by the rotation of the oval gear by the indenter of the measured medium.
Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

This oval gear heavy oil flow meter is used for the continous and intermittent measurement, Control of the pipe liquid flow, which are typical of Volumetric flowmeter.
Our oval gear flow meter has the Feature of large flow range,low pressure loss, large viscosity range,Easy installation and high accuracy; This oval gear flow meter also can measure high temperature, high viscosity liquids with easy calibration.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

Oval Gear Flow meter Features:
1. High measurement accuracy: 0.2 and 0.5;
2. Oil Flow meter with Simple, robust and reliable operation;
3. The oval gear flow meter is especially suitable for measuring medium with high viscosity and is not sensitive to changes in viscosity of the liquid to be measured;

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

This pulse output oval gear flow meter is widely used in liquid flow control in various industrial fields, This oil flow meter has the characteristics of large range, high precision,convenient use and maintenance. The medium with the higher viscosity, the smaller the leakage amount from the gear and the metering gap, so the larger the stickiness of the nuclear measuring medium, the smaller the leakage error, and the better the measurement.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

Oval gear flow meters are often used to measure heavy oil,lube oil and diesel etc. It is a kind of economical and reliable solution for gear oil flow rate measurement. This oval gear flow meter is a positive displacement flow meter that comprises of oval-shaped gears rotating inside a closed casing. The difference in pressure causes the meshing gears to rotate, trapping a fluid pocket between the gears and the outer casing, subsequently emptying it as it passes through to the next pipe.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

The oval gear oil flow meter has good performance on measuring high-temperature and high-viscosity liquids. This oil flow meter is applicable to the calibration and metering of crude oil, chemical, chemical fiber, traffic, commerce, food, medicine and health, scientific research and military etc.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

This gear oil flow meter has high measurement accuracy and is suitable for the measurement of high viscosity medium flow, but it is not suitable for fluids containing solid particles (solid particles will lock the gears, so that the flow cannot be measured).

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Explosion Proof: Flame-proof Type, ExdIIBT4
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

This oval gear oil flow meter is widely used in liquid flow control in various industrial fields and is suitable for various types of liquid measurement, such as crude oil,diesel, Gasoline, etc. This Diesel flow meter has the characteristics of large range, high precision,convenient use and maintenance.
Different manufacturing materials are selected to meet the liquid flow measurement in various fields such as petroleum, chemical industry, medicine, food, metallurgy, electric power, and transportation.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp

This oval gear oil flow meter is a direct volume positive displacement (PD) meter known for accuracy and longevity in the field. This fuel oil flow meter has simple, robust design which ensure the oval gear meter is stable in harsh environments, this oval gear flow meter maintains accuracy regardless of the liquid temperature, changes in viscosity, or pulsating flow.

Specifications:
Medium: Fuel Oil; Petroleum; Petroleum Products; Vegetable Oil; Food; Chemicals
Accuracy: ¡À0.2%; ¡À0.5%;
Nominal Diameter: DN8~DN200 mm
Nominal Pressure: PN1.6~6.3MPa;
Medium Temperature: -10 ¡ãC~280 ¡ãC
Medium Viscosity: 2~3000mPa?s
Power Supply: 12V DC; 24V DC
Output Signal: Pulse; 4~20mA.DC; RS485
Ambient Temperature: -20~55¡ãC
Sensor Material: Cast Iron; Cast Steel; Stainless Steel
Sensor Connection: Flange, Screw, Sanitary Tri-clamp